About this product
About This Leveling Mount - BSW-0
Pick the BSW-0 for the lightest leveling job in the line, a benchtop fixture or small enclosure that has to sit flat on a floor that pitches a little, where the 1/4-20 stud and 1-inch foot are all the footprint you need.
The 1-inch steel base tilts on its ball socket so it meets a sloped floor flat while the stud stays vertical, which spreads the load across the whole pad instead of one edge. A fixed foot set on a tilted floor rides on a single corner, rocks under the smallest nudge, and slowly backs its jam nut loose. The swivel pad takes that movement out before it starts.
Ideal applications
- Benchtop test fixture on a pitched lab floor, leveled once and locked
- Small electronics enclosure on a raised access floor with panel seams
- Light instrument stand that has to hold a bubble vial dead-level
Skip the BSW-0 if you are leveling real machinery; step up to the 3/8-16 BSW-1 with its wider 1.25-inch base.
Pairs with: three more BSW-0 under the same chassis for a four-corner set, from the Leveling Mounts collection.
Wrong fit? Heavier load, or a finished floor you cannot scratch? See the BSW-1 and the nylon-base BNYLA24.
Also in this family: BSW-1, BSW-2, and the full Leveling Mounts collection.
Description supplied by Caster Central through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






