About this product
About This Leveling Mount - SSW-1
Specify the SSW-1 for light equipment that has to level on an uneven floor and then survive daily washdown, where a plated steel mount would bloom rust at the first hose-down and fail a sanitation check.
The Stainless Steel build is the whole reason to choose this over the plain BSW-1: the stud, nut, and swivel pad all resist the caustics and chlorides that pit a coated foot from the threads outward. Once corrosion starts in a leveling stud, the nut seizes and the next adjustment shears it. The stainless hardware keeps turning clean for the life of the machine, and the 1.25-inch pad still tilts to seat flat on a sloped floor.
Ideal applications
- Food-prep table leveled on a tiled floor that gets hosed each shift
- Light packaging stand in a chloride-heavy cold room
- Lab bench in a wet chemistry area with frequent surface wipe-down
Skip the SSW-1 in a dry plant where corrosion is not a factor; the plain-steel BSW-1 gives the same 1.25-inch swivel base for less.
Pairs with: the larger stainless SSW-2 on the loaded end of a wet-area frame.
Wrong fit? Dry area, or a non-marking foot? See the steel BSW-1 and nylon-base BNYLA24.
Also in this family: SSW-2, BSW-1, and the full Leveling Mounts collection.
Description supplied by Caster Central through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






