About this product
PEEL STOP is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates. PEEL STOP tightly bonds to old paint and problem areas, forming a sound surface for new paint. PEEL STOP forms a tough acrylic film that stays flexible and helps prevent peeling by letting moisture escape.
A clear sealer, PEEL STOP works like nothing else to stop peeling problems on old or new surfaces. PEEL STOP prevents peeling, blistering, checking, cracking and flaking on wood siding and trim, yellow pine, rough sawn cedar, textured plywood, chalking or powdering, concrete and concrete block, stucco and galvanized gutters. Peeling paint is usually caused by moisture problems paint fatigue or painting over chalky surfaces.
PEEL STOP can be applied with a brush or roller and cleans up quickly and easily with soap and water.
- Interior & exterior water-base
- Extend the life of problem surfaces
- Binds cracking, chalking and peeling paint
- Glues down cracks and gaps under edges of old paint
FOR BEST RESULTS
Back brush or roll to work product into cracks and edges of old paint.
Coverage 300-400 sq ft per gallon (depending on surface porosity and application method) Dry to Touch 30 Minutes Dry to Recoat 2 Hours Clean Up Soap and waterDescription supplied by ThePaintStore.com through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






