About this product
Product Description
The WEILER 21165 is a single-spiral brass hand tube brush designed for cleaning the interior of tubes, pipes, and small-bore fittings. The 2-inch brush length and 0.5-inch brush diameter make it suited for precision cleaning tasks in tight passages. Brass fill wire at 0.004 inches in diameter is soft enough to clean without scoring metal surfaces. The galvanized steel shank measures 0.125 inches in diameter and terminates in a loop handle for hand-drive use. Overall length is 8 inches, giving the technician adequate reach into ports and heat exchanger tubes. Plumbers, HVAC techs, and refrigeration mechanics typically keep this style of brush on hand for tube prep and light deburring work.
The WEILER 21165 is well suited for residential and light commercial applications where tube and port cleanliness is critical before brazing, soldering, or fitting assembly. Common uses include cleaning evaporator and condenser tube sheets, boiler fire tubes, hydraulic fittings, and small plumbing supply ports. The hand-drive loop handle requires no power tool, making it practical for confined spaces and field service work where a drill or rotary tool is not available or appropriate.
Key Features
- Brass fill wire resists corrosion and cleans without gouging soft metal tube walls
- Single-spiral construction with one bristle spiral and one stem wire for consistent contact
- 0.004-inch wire diameter provides fine, controlled scrubbing action
- Loop handle allows hand-drive use without a chuck or power tool
- Galvanized steel shank at 0.125-inch diameter resists bending under normal hand pressure
- 8-inch overall length provides reach into deeper ports and tube bundles
Compatibility
Designed as an OEM-style hand tube brush for cleaning tubes and small-bore fittings with an inside diameter of approximately 0.5 inches across plumbing, HVAC, and refrigeration service applications.
Installation Notes
No power tool is required for this brush; operate by hand only to avoid damaging the single-spiral fill or bending the shank. Ensure the tube or fitting is depressurized and free of refrigerant, water, or gas before inserting the brush. Inspect the brass fill for wear or splayed wires before each use and replace the brush if the fill diameter is visibly reduced. Dispose of any metal debris removed during cleaning before reassembling or brazing fittings.
Technical Specifications
- Brush Diameter: 0.5 inches
- Brush Length: 2 inches
- Overall Length: 8 inches
- Fill Material: Brass
- Wire Diameter: 0.004 inches
- Shank Diameter: 0.125 inches
- Shank Material: Galvanized Steel
- Spiral Type: Single
- Number of Bristle Spirals: 1
- Number of Stem Wires: 1
- Handle Style: Loop
- Weight: 0.05 pounds
Standard Information
- Brand: WEILER
- Manufacturer Part Number: 21165
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






