Walk Behind Floor Scrubber, 20", 12.5 Gallon, Battery, Pad Assist, Disk, 2/2/1 Warranty, Lifetime Warranty On Vacuum Motor, SSRLA510S

Designed for Everyday Operation

Proven Structural Advantages

Warranty & Service Guarantee

Commercial-grade coverage designed to keep you cleaning.

2 Years

Parts Coverage

2 Years

Labor Coverage

Lifetime

Vacuum Motor

5 Years

Polymer Housing

A floor scrubber deep-cleans hard flooring more efficiently than manual mopping ever could. They're a powerful investment for any facility with regular cleaning needs.

The SweepScrub SSRLA510S floor scrubber uses a rotating floor pad or brush combined with water and detergent to remove dirt, grime, and other soils. This floor scrubber collects the dirty solution into the recovery tank by using a vacuum motor and squeegee system, leaving floors cleaner, safer, and ready to dry.

The SSRLA510S floor scrubber is battery-powered, self-contained, designed for frequent, professional use in commercial and industrial environments. Here are some of the features that make the SSRLA510S a wise investment for any facility manager.

• Easy to use fingertip controls
• Compact design, simple to maneuver in tight areas
• Disc and vacuum motors protected from water splash of solution and recovery tanks
• Brush, pad driver, offboard charger and squeegee assembly included
• The pad assisted drive helps move the machine forward during operation
• Heavy duty cast aluminum squeegee assembly
• Rounded squeegee for quick and complete solution pick-up allows for one pass cleaning
• Standard or Eco mode
• Powerful .67 HP brush motor 160RPMs-180RPMs ensure consistent and safe performance

Floor scrubbers like the SSRLA510S are common in high-traffic environments where speed and consistency matter most. Facilities like hospitals, schools, airports, retail stores, and manufacturing plants use them daily to keep floors safe and clean.

Unlike self-propel or traction drive machines that use an electric motor to power the wheels and drive system, pad assist floor scrubbers, like the SweepScrub SSRLA510S, rely on the spinning scrub deck to propel the machine and the operator during cleaning.

Pad assist floor scrubbers are a great choice for facilities that do not have ramps, are relatively flat with little transportation from job site to job site and for environments with obstacles, corners, edges, etc.

The SSRLA510S is a disk floor scrubber. Disk machines have strong overall down pressure, the disk spins at slow RPMs allowing the solution and brush to agitate, remove dirt, soils and stains from the flooring.

Disk machines can be fitted with different types of brushes ranging from soft nylon up through polypropylene and to abrasive grit. For floors with floor finish or wax, brushes are usually not the ideal choice. Although they will last longer than floor pads before needing to be replaced, brushes don't offer the same surface area that a floor pad does.

The SweepScrub SSRLA510S is generally safe for all types of flooring that are not harmed by regular water. In our experience, most of the issues that arise from using a floor scrubber on a floor has to do with the chemical being used. We suggest using neutral-based floor cleaning chemicals with a pH range between 7-9.

The SweepScrub SSRLA510S will deliver up to 2.5 hours of runtime, although runtime is highly subjective to the type of environment. For every 1 hour you use the machine, it takes 2 hours of charging time to get that 1 hour back. In the case of the SSRLA510S, if you ran completely dead, it would take 5 hours for a full charge.

We specifically imported this line to prevent those delays. The last few years showed us that even massive manufacturers like Tennant and Nilfisk source parts globally, which regularly leaves customers stranded. Since our primary business is selling parts, we saw that frustration firsthand. Because we import this line directly, we control the entire supply chain. We stock every nut, bolt, and screw for this machine at our facility in North Little Rock, Arkansas, and we ship replacements immediately.

There is no catch. The lower price is a direct result of our supply chain. Traditional manufacturers sell through distributor networks and local dealers, with each step adding a markup. We import these machines directly and sell them straight to you. You get the savings of a direct import, but you still deal directly with SweepScrub.com for all parts and service support. That is the full value of this machine: a direct-import price with the parts depth of a specialty dealer.

This is a newer line for us, and we want to be upfront about that. We have sold several dozen of these machines nationwide since we started with few issues. The most common problem we have run into is transit damage from carriers failing to strap the machines down properly in the truck. We chose this line because the design is simple and relies on heavy-duty, mechanical components rather than over-engineered computer boards. We have been in business since 2009 and we would not risk our reputation on a machine we did not trust.

Since we import this line directly, we have a direct line to the factory. If we identify a pattern or an area for improvement, we work directly with the manufacturing and engineering teams to update the design. Beyond that, SweepScrub started in 2009 by rebuilding and refurbishing floor sweepers and scrubbers. Our service technicians know commercial cleaning equipment inside and out. We do not just sell these machines: we know how to service, repair, and support them for the long haul.

This machine carries a 2-year parts, 2-year labor, and 1-year prorated battery warranty, plus 5-year housing coverage and a lifetime warranty on the vacuum motor. Parts that fail due to manufacturing defects are shipped to you free of charge during the warranty period. To start a claim, just contact us directly. Our internal service technicians review your specific situation and we go from there. We also work with a national network of service providers if you need someone local.

Contact us immediately and document the damage with photos. We handle freight damage claims directly and our goal is to get your machine operational as fast as possible, whether that means shipping replacement parts or arranging a return. Keep all original packaging including cardboard, pallets, and hardware until we confirm the resolution path. This is rare, but we have a clear process when it happens and we do not leave customers to figure it out alone.