Wacker Neuson BS50-2plus Vibratory Rammer 2 Stroke

• Driven by the exclusive WM80 2-cycle engine with catalytic converter, which was designed and developed by Wacker Neuson specifically for demanding ramming applications
• Effortless to start
• The lowest CO-emissions, significantly below all four-cycle engines
• Maximum convenience when refuelling and always the right mixing ratio: Two separate tanks for fuel and two-cycle oil. One oil tank refuelling suffices for 120 hours of operation. Lockable oil tank cap available as an accessory.
• Thanks to the automatic injection, always the optimal combustion and maximum performance
• Automatic shutdown of the engine after 10 minutes at idle in order to reduce fuel consumption and emissions
• Specially designed and developed 4-stage air filter system provides for longer operating time and greater durability
• With operating hours counter
• Compact dimensions, therefore very manoeuvrable and easy to handle
• Very good gradeability
• High performance, maximum jump height and impact force

OPERATING FLUIDS Imperial Metric Lubrication intervall 250 h 250 h Oil volume 0,185 gal US 0,700 l Oil specification SAE 10W-40 SAE 10W-40 Tank capacity 0,8 gal US 2,90 l ENGINE Imperial Metric Fuel management Carburettor / oil injection Carburettor / oil injection Engine operating mode two-stroke two-stroke Cooling air cooling air cooling Exhaust-gas limit China Stage 2 China Stage 2 Oil specification ISO-L-EGC ISO-L-EGC Operating Engine speed 4.250 1/min 4.250 1/min Fuel consumption 0,3 GPH US 1,6 lb/h 1,00 L/hr 0,73 kg/h Idling speed 2.000 1/min 2.000 1/min Starter type Recoil starter Recoil starter Operating power 2,4 hp 1,8 KW Engine type Gasoline engine Gasoline engine Cylinder 1 1 Engine Manufacturer Wacker Neuson Wacker Neuson Standard (Operating power) ISO 3046-1 ISO 3046-1 Standard (Effective power) ISO 3046-1 ISO 3046-1 Cylinder capacity 4,9 Inch3 80 cm3 Tank capacity 0,8 gal US 2,90 l Nominal Engine speed 4.400 1/min 4.400 1/min Fuel Alkylate fuel/Oil mixture Alkylate fuel/Oil mixture Electrode distance 0,020 - 0,032 " 0,5 - 0,8 mm Spark plug(s) Champion RL86C Champion RL86C Effective power 2,4 hp 1,8 KW Fuel mix ratio 1:100 1:100 MECHANICAL - OUTPUT DETAILS Imperial Metric Power of impact 3.596,9 lbf 16 kN Forward Running 0,5 fps 9,50 m/min Number of blows 687 1/min 687 1/min ELECTRICAL SYSTEM Imperial Metric Display Equipment Operating hours counter Operating hours counter Electrode distance 0,020 - 0,032 " 0,5 - 0,8 mm Operating elements Pushbutton OFF Pushbutton OFF ENVIRONMENT DATA Imperial Metric Operating temperature range 14 - 104 °F -10 - 40 °C Sound level LpA (Standard) EN 500-4 EN 500-4 Sound power LWA, guaranteed 108,0 dB(A) 108,0 dB(A) Storage temperature range -22 - 122 °F -30 - 50 °C HAV summation (average value) 29,2 ft/s2 8,9 m/s2 Uncertainty in measurement HAV 4,3 ft/s2 1,3 m/s2 HAV summation (Standard) EN ISO 5349-1 EN ISO 5349-1 Sound level LpA 93,0 dB(A) 93,0 dB(A) Sound power LWA (Standard) 2000/14/EG 2000/14/EG Sound power LWA, measured 107,0 dB(A) 107,0 dB(A) MECHANICAL DETAILS Imperial Metric Operating weight 130,1 lb 59,0 kg Length 26,5 " 673 mm Length Ramming Shoe 13,4 " 340 mm Height 37,0 " 940 mm stroke at tamper 2,5 " 64 mm Width Ramming Shoe 11,0 " 280 mm Width 13,5 " 343 mm Weight 130,07 lb 59,00 kg