Traeger Replacement Porcelain Cooking Grate (34-Series): HDW194-AMP

This Replacement Porcelain Cooking Grate is 34-0" wide and 19-3/8" deep Made for these Models: BBQ075.01, BBQ075.02 Version (Texas), Texas Elite, Texas Pro, and all 34 Series Maybe substituted with little to no modifications for the following Traeger Grills: Select Elite, Select Pro, Deluxe Elite 300, Century 34. These grills used combination cooking grates but the fitment measurements are nominally the same. If you are using this cooking grate as a substitution, a small 1" square may need to be removed from the rear-center to accommodate the RTD probe or the probe can be relocated. (custom modification, no instructions included)  Measurements required for proper fitment Before ordering a replacement cooking grate, please measure your existing grate (Measurement A), main cooking grate opening ( Measurement B), and the nominal interior width and depth of the grill (Measurement C).  If your grill has more than one grate and they do not overlap by design, add the width of each grate together to find your total product width. Measure the grill opening inside that the cooking grate is covering. The opening is from the outside of the support edges, left to right, and the same way front to back (Measurement B).* NOTE - Most grills will have 1/4"~1/2" support widths. This is the lip/ shelf/ bracket that the cooking grate rests on. The opening measurement does NOT include this surface. Measure the nominal interior grill width from sidewall to sidewall and the depth from the front lip to the back wall (Measurement C). If your “A” measurement is the same as this product, you’re good. If your “A” measurement is different from this product, compare it with your “B” and “C” measurements. This product needs to be larger than the “B” measurement AND smaller than the “C” measurement. 34" L x 19 3/8" W x 1/2" H - Extremely Durable - Porcelain Coated --- PRODUCT DETAILS SKU: HDW194-AMP Vendor: Traeger Product Type: Grill > Pellet > Parts > Cooking Grates & Racks Finale Category: Cooking Grate Part Type: Aftermarket REPLACEMENT PART NUMBERS OEM MPN: HDW194 TECHNICAL SPECIFICATIONS Length (in): 34" Width (in): 19.375" Height (in): 0.5" Material: Porcelain-coated Steel Weight: 10.5 lbs COMPATIBILITY Traeger: Select Elite, Deluxe Elite 300, Select Pro, Texas Elite, Eastwood 34, Pro Series 34, Texas Pro, Texas Elite 34, Texas Limited Edition, Texas ADDITIONAL INFORMATION Helpful Tips: To help keep porcelain coated grill grates in good condition, it's important to avoid scraping them with a metal or wire brush, use a Non-Abrasive Wooden Grill Grate Scraper. To reduce the need for excessive scraping, clean porcelain grates with a Non-flamable & Non-toxic Grill Cleaner formulated with plant based materials safe for use on all food prep surfaces.