Tractor Manure Spear Attachment – Built for Farm Waste Handling and Livestock Maintenance | Stinger Attachments

Overview

When you're managing livestock, keeping barns clean, or maintaining stables and pens, you need equipment that works as hard as you do. The Tractor Manure Spear from Stinger Attachments is built to help farmers, ranchers, and livestock producers tackle essential daily chores with less effort and in less time. Whether you're mucking out stalls, spreading bedding, moving feed, or clearing brush and debris around the property, this attachment delivers the durability and versatility you need to get it done right.

Manufactured by Stinger Attachments and distributed by Forge Claw, this manure spear is designed with real farm work in mind. It's not just about moving manure. This attachment handles pen-pack removal, distributes straw and hay, lifts matted bedding materials, and even helps with tree and brush removal projects around your property. If you run a small hobby farm or manage a large-scale livestock operation, this tool gives you the reach and strength to handle a wide variety of materials without switching equipment.

The manure spear features extra-long 40-inch tines that slide easily under bulk waste, compacted bedding, or loose materials. These tines are angled at 45 degrees on the ends to penetrate materials smoothly and reduce hang-ups. The spacing is set at 8 inches on-center, which strikes the right balance for handling different types of waste and feed without letting smaller material fall through or creating excessive drag.

Construction is where this attachment really stands out. Stinger Attachments uses grade 50 steel throughout the frame, paired with heavy-duty 2-inch cold rolled 1045 steel shafts fitted inside quarter-inch thick sidewall bushings. That's not entry-level construction. It's built to take the punishment of daily farm use, season after season. The main frame is welded from 4x4-inch square tubing, giving you a solid, stable platform that won't flex or twist under load.

One of the smartest design features is that each tine is individually removable and replaceable. If you bend or break a spear during heavy use, you don't need to replace the entire attachment or send it out for welding repairs. Just unbolt the damaged tine and install a new one. This keeps your downtime to a minimum and your maintenance costs low. It's the kind of thoughtful engineering that makes a real difference when you're working against the clock.

The attachment is available in four sizes: 60, 68, 76, and 84 inches. This range lets you match the tool to your tractor's capacity and the size of your workload. Smaller widths are ideal for tight barn aisles and compact tractors, while the larger models let you move more material per pass if you're working in open pens or larger facilities. All models come standard with an open back design, though a closed-back option is available if you need extra containment for finer materials.

The bucket features a 75-degree back angle, which helps materials stay on the spears as you lift and transport them. This angle also makes it easier to dump loads cleanly without material sticking or sliding off prematurely. It's a small detail, but it adds up to fewer trips and less frustration over the course of a long workday.

Forge Claw is proud to distribute Stinger Attachments products because they're built by people who understand what farm equipment needs to do. This manure spear connects quickly to your tractor's loader and gets you working in minutes. There's no complicated setup, no special adapters, and no guesswork. Just hook it up and go.

Beyond livestock applications, this attachment proves its worth in a surprising number of situations. Need to clear brush piles or move fallen branches after a storm? The long tines and strong frame handle it. Want to relocate compost, mulch, or yard waste around the property? It's perfect for that too. Some users even find it useful on construction sites for moving debris or sorting through mixed materials. The versatility means you're not buying a single-purpose tool. You're adding a workhorse attachment that earns its keep in multiple ways.

Stinger Attachments backs this manure spear with a two-year warranty covering defects in materials and workmanship. That kind of coverage shows confidence in the product and gives you peace of mind in your investment. Combined with Forge Claw's commitment to customer service and shipping calculated at checkout, you're getting a buying experience that's as solid as the equipment itself.

If you've been making do with a standard bucket or trying to handle livestock waste and bedding with tools that weren't designed for the job, you know how much time and energy that wastes. The right attachment makes every task faster and less physically demanding. It reduces the wear and tear on your body and your tractor, and it helps you maintain cleaner, healthier conditions for your animals with less effort.

This manure spear is priced competitively for the quality and features you're getting, with models ranging from $2,295 to $2,845 depending on the size you choose. When you consider the time you'll save, the reduced labor costs, and the long service life of a well-built attachment, it's an investment that pays for itself. Forge Claw makes it even easier with flexible financing options and shipping calculated at checkout nationwide, so there's no reason to keep struggling with inadequate equipment.

Specifications

• Available Widths: 60", 68", 76", 84"
• Tine Length: 40 inches with 45-degree angled ends
• Tine Material: Heavy-duty 2" 1045 cold rolled steel shafts
• Tine Spacing: 8 inches on-center
• Bushing: 1/4" thick sidewall bushing stock
• Frame Construction: 4" x 4" square tubing
• Steel Grade: Grade 50 steel throughout
• Back Angle: 75 degrees
• Back Style: Open back standard; closed back optional
• Tine Design: Individually removable and replaceable bolt-in tines
• Country of Origin: USA

Features

• Extra-Long 40-Inch Tines — Provide superior reach and penetration for getting under compacted bedding, matted straw, and bulk manure piles with minimal effort
• 45-Degree Angled Tine Ends — Designed to slice through materials smoothly and reduce hang-ups, making loading faster and more efficient
• Grade 50 Steel Construction — Delivers exceptional strength and durability to withstand the rigors of daily farm use and heavy loads without bending or breaking
• Removable and Replaceable Tines — Individual bolt-in design allows quick and affordable replacement of damaged spears without downtime or expensive repairs
• Heavy-Duty 4x4 Square Tube Frame — Provides a rigid, stable platform that resists twisting and flexing under load for consistent performance
• 1/4-Inch Thick Sidewall Bushings — Protect tine shafts from wear and extend service life even in abrasive conditions
• 75-Degree Back Angle — Helps retain materials on the spears during transport and allows for clean, controlled dumping
• Multiple Width Options — Available in four sizes to match your tractor capacity and job requirements, from tight barn aisles to open pen work

Benefits

Time is your most valuable resource on the farm, and this manure spear is designed to give you more of it. Instead of making multiple trips with a standard bucket or manually pitching materials, you can load and move larger volumes in a single pass. The long tines get under materials that other attachments struggle with, and the wide spacing prevents clogging while still retaining what you need to move. Over the course of a week or a season, those minutes add up to hours of saved labor that you can redirect to other priorities.

Durability translates directly to lower operating costs. When you invest in an attachment built from grade 50 steel with heavy-duty components, you're not replacing it in a few years or dealing with constant repairs. The replaceable tine design is a perfect example of cost-effective engineering. A bent tine is a maintenance item, not a catastrophic failure. You spend a few minutes and a modest amount on a replacement part instead of hundreds or thousands on a new attachment or major welding work. That's smart economics for any operation.

Physical strain is another hidden cost of farm work. Lifting, pitching, and moving heavy, awkward materials day after day takes a toll on your back, shoulders, and joints. This manure spear does the heavy lifting for you. Your tractor's hydraulics provide the power, and the attachment's design makes the work efficient. You stay in the seat, control the process, and finish the job without the physical punishment that comes with manual labor. That's not just about comfort. It's about staying healthy and productive for the long haul.

Versatility adds value in ways that aren't always obvious at first. Yes, this is a manure spear, but it's also a brush mover, a compost handler, a bedding distributor, and a debris clearance tool. That flexibility means you're getting multiple tools in one attachment. Instead of owning and storing separate implements for different jobs, you have one piece of equipment that adapts to whatever the day throws at you. That saves money, saves space, and simplifies your operation.

Cleaner facilities mean healthier animals and a better working environment. When you can efficiently remove waste and refresh bedding, you maintain better hygiene in barns, stables, and pens. This reduces the risk of disease, keeps animals more comfortable, and makes your property more pleasant to work on. The manure spear's effectiveness at getting under and lifting matted materials means you're doing a more thorough job with less effort, which benefits everyone on the farm.

The return on investment becomes clear quickly. Calculate what you're spending on labor for mucking out stalls, spreading bedding, and moving materials. Factor in the time spent on those tasks and what else you could be doing with that time. Add in the cost of physical strain and the potential for injury from manual handling of heavy materials. When you compare all of that to the purchase price of a well-built attachment that will serve you reliably for years, the math works strongly in your favor.

Additional Information

This manure spear is ideal for anyone managing livestock, from small-scale hobby farmers to large commercial operations. Dairy farmers, cattle ranchers, horse stable operators, and poultry producers all benefit from the efficiency and durability this attachment provides. It's also valuable for landscaping professionals who need to move organic materials, municipal workers maintaining facilities, and property owners managing large acreages with diverse maintenance needs.

The attachment is designed to work with standard tractor loaders and quick-attach systems. Before ordering, confirm your tractor's lifting capacity matches the size you're considering and ensure your loader has a compatible mounting system. Forge Claw's team can help you verify compatibility and select the right width for your specific needs. The open back design is standard and works well for most applications, but if you're regularly handling finer materials that tend to fall through, consider the closed-back option for better containment.

Operating the manure spear efficiently is straightforward. Approach material piles at a low angle to allow the tines to slide underneath rather than pushing into the pile. Use the tractor's hydraulics to curl the attachment slightly as you lift to keep materials secure on the spears. When dumping, extend the attachment fully and use gravity to your advantage for a clean release. Avoid overloading beyond your tractor's capacity, and be mindful of ground conditions to prevent getting stuck when carrying heavy loads.

Maintenance requirements are minimal but important. Regularly inspect tines for damage or excessive wear, particularly if you're working around rocks or hard surfaces. Check bolts and connections periodically to ensure everything stays tight. Keep the attachment clean, especially if you're moving corrosive materials like manure or compost with high moisture content. A quick rinse after use and occasional lubrication of moving parts will extend service life significantly. Store the attachment under cover when possible to protect it from the elements and preserve the finish.

Warranty Info

Manufactured by Stinger Attachments, this product is covered under the manufacturer's 2-year warranty for defects in materials and workmanship. Forge Claw proudly stands behind every unit we sell and offers shipping calculated at checkout on all heavy machinery attachments. Order your Tractor Manure Spear (MS) from Forge Claw today. We offer flexible, easy financing and shipping calculated at checkout so every operator can get their hands on top-quality equipment.