About this product
Fitment Information
- Acura Integra (1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001)
- Lowers 1.4" to 4.8" Front
- Lowers 0.2" to 4.8" Rear
- Cars with rear fork style lower mounts only
Specs & Features
- 16 Way Adjustable
- Full length ride height adjustment
- Includes Front Pillowball Upper Mounts - Due to the double A-Arm design of the Integra, camber places can not be used so these coilovers do not come with them. We recommend a separate camber kit.
- Spring Rates: 560 lb Front and 392 lb Rear
- Includes a full set of 4
- 12 Month Warranty
- Genuine TEIN
Note: Image is only a representation of the coilovers. TEIN doesn't have vehicle specific images. Your coilover will be specific to your vehicle. If you have any questions about this kit, please contact us.
Product Description
The TEIN Flex Z coilovers are a solid pick for the 1994-2001 Acura Integra if you want a quality street-oriented setup with good lowering range and adjustable damping.
The Flex Z runs a twin-tube internal design, which is what gives it one of the better street ride qualities in the coilover category. It uses a full-length height adjustment system, meaning you can lower the car to the maximum allowable level while maintaining shock travel and ride quality at that setting. Damping is 16-way adjustable for both compression and rebound together, so you can soften it up for daily driving or firm it up for track use.
This kit includes front pillowball upper mounts. Because of the double A-arm design on the Integra, camber plates are not compatible with this kit. If you need front camber adjustment after lowering, you will want to pick up a separate Acura Integra camber kit. Dust boots are also included.
Each Flex Z is coated with TEIN's ZT Coating, which is a multi-layer rust-prevention finish. The springs are no-sag rated, and the kit is EDFC compatible if you want to add TEIN's electronic damping force controller down the road.
Note: This kit fits cars with rear fork style lower mounts only. Confirm your rear suspension configuration before ordering.
Specs
- Fitment: 1994-2001 Acura Integra LS, GS, RS, GSR (rear fork style lower mounts only)
- Lowering range: 1.4" to 4.8" front, 0.2" to 4.8" rear
- 16-way adjustable damping
- Spring rate: 560 lb front, 392 lb rear
- Twin-tube design
- Full-length ride height adjustment
- Front pillowball upper mounts included
- Dust boots included
- ZT Coating for rust prevention
- No-sag springs
- EDFC compatible
- Full set of 4
- Part number: VSA00-CUSA1-C
- 12-month warranty
Description supplied by Redline360 through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
