About this product
Overview
This Bradco skid steer dozer blade is a grading and levelling attachment in 84" and 96" widths, weighing 1,365 and 1,460 lbs. Angle and tilt are hydro-electrically controlled — the blade angles 30° right or left off centre and tilts 10° off horizontal in both directions — with a tilt indicator visible from the operator's seat. It fits a universal skid steer mounting plate.
Key Features of the Bradco Skid Steer Dozer Blade
- Available in 84" and 96", at 1,365 and 1,460 lbs.
- Hydro-electric controlled angle and tilt, both adjusted from the cab.
- Angle 30° right or left off centre for windrowing and casting material to one side.
- Tilt 10° off horizontal in both directions for crowning and cross-fall.
- Tilt indicator visible from the operator's seat — you can see the blade attitude without guessing.
- Universal skid steer mounting plate, so it fits the standard quick attach.
- A 6 way dozer blade for skid steer work in practice — raise, lower, angle both ways and tilt both ways from the seat.
- The 96 inch dozer blade covers more ground per pass; the 84" suits smaller loaders and tighter sites.
- A skid steer dozer blade attachment rather than a fixed push blade — it is the angle and tilt that make it a grading tool.
Why Choose This Skid Steer Dozer Blade
- The tilt indicator is the feature operators actually use. Cross-fall is impossible to judge from the seat by eye, and a visible indicator turns guesswork into a setting.
- Angling from the cab changes what the machine can do. A fixed blade pushes; an angling blade windrows, casts and finishes — without stopping to reset anything.
- A skid steer grading blade is not a bucket. A blade carries a straight cutting edge across its full width, which is what produces a flat surface rather than a scalloped one.
Bradco 84" / 96" Tilting Dozer Blade Specifications
Specification Detail Widths 84" and 96" Weight 1,365 lbs (84") · 1,460 lbs (96") Angle 30° right or left off centre Tilt 10° off horizontal, both directions Control Hydro-electric, from the cab Indicator Tilt indicator visible from operator seat Mount Universal skid steer mounting plateBlade, Bucket or Land Plane?
A dozer blade angles and tilts to cut and cast material, which is what makes it a grading tool rather than a carrying one. A bucket moves material; a land plane finishes an already-close surface. The 78" Land Plane is the finishing tool once the ground is near grade, and the construction bucket is what carries material away rather than casting it. For rough grading and windrowing the blade is the right tool — and the 96" width covers more ground per pass if your machine carries it.
Which Machines Fit This Skid Steer Dozer Blade?
This blade fits a universal skid steer mounting plate, and its angle and tilt mechanisms are powered from the loader. Because it is a mechanical grading attachment rather than a rotating one, there is no minimum flow to reach — but the machine does need to carry 1,365 to 1,460 lbs at the quick attach.
Machine requirement Specification Mount Universal skid steer mounting plate Attachment weight 1,365 lbs (84") · 1,460 lbs (96") Control Hydro-electric angle and tilt, powered from the loader Widths available 84" and 96"Check your loader's rated capacity against the blade weight, and confirm it can power the angle and tilt circuit. If you are unsure, contact eskidsteer.com at (866) 757-8337.
84" / 96" Tilting Dozer Blade Questions, Answered
What is the difference between the 84 and 96 inch blades?
Width and weight — 1,365 lbs for the 84 inch and 1,460 lbs for the 96 inch. The wider blade covers more per pass; the narrower one suits smaller loaders and tighter sites.
Is this a 6 way blade?
In practice yes — it raises and lowers with the loader arms, angles 30 degrees right or left, and tilts 10 degrees in both directions, all hydro-electrically from the cab.
What does the tilt indicator do?
It shows blade attitude from the operator seat, so cross-fall can be set deliberately rather than estimated by eye.
Will it fit my skid steer?
It uses a universal skid steer mounting plate. The constraint is weight — confirm your loader is rated to carry 1,365 to 1,460 lbs at the quick attach.
Can I use it for snow?
It angles 30 degrees each way, which is what windrowing snow requires. It is built for grading, so it is heavier than a dedicated snow blade of the same width.
Is this the same as an angle blade attachment?
It angles like one, but it also tilts 10 degrees in both directions. A plain angle blade attachment sets cast direction only; this one also sets cross-fall.
How is shipping calculated?
Shipping is calculated at checkout — simply add the item to your cart, enter your delivery address, and the shipping charge will be displayed before you complete your order.
84" / 96" Tilting Dozer Blade Documentation
Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
