Skid Steer Material Bucket – High-Capacity Loading for Heavy-Duty Jobs | Stinger Attachments

Overview

When you're moving material all day, bucket capacity and visibility can make or break your efficiency. The Skid Steer Material Bucket – Series 3 (MB3) from Stinger Attachments is built to give larger skid steer loaders and compact track loaders the extra capacity they need without sacrificing clean-out or sightlines. Whether you're loading dirt, gravel, mulch, or demolition debris, this bucket is engineered to handle high-volume jobs with the kind of durability that keeps you productive season after season.

Manufactured by Stinger Attachments and distributed nationwide by Forge Claw, the Series 3 Material Bucket delivers a smart balance of size, strength, and operator-friendly design. It's a step up from the Series 2 in terms of capacity, making it the right choice for contractors and landowners running mid- to full-size skid steers that demand more from their attachments. With five width options ranging from 60 to 84 inches, you can match the bucket to your machine and your workload without over- or under-sizing.

The shell is fabricated from 3/16-inch grade 50 steel, giving you a durable foundation that won't fold under heavy use. The bucket measures 40 inches deep, which increases your struck and heaped capacity while keeping the cutting edge visible from the cab. That extra depth means fewer trips to the pile and better control when you're grading or backfilling. You're not guessing where the edge is, and you're not wasting time repositioning.

Stinger designed this bucket with a 68-degree back angle, a spec that's proven across thousands of machines to offer excellent rollback and dump performance. It's not too steep and not too shallow. You get clean material release and stable load retention without having to fight the hydraulics or reposition constantly. The bucket dumps cleanly, and it holds a load during transport without spilling over rough ground.

One of the standout features is the reinforcement tube across the top of the bucket. It adds structural rigidity where you need it most and keeps sightlines open so you're not working blind. Combined with the rolled insert at the bottom and the four heavy-duty wear bars, this bucket is built to take a beating and keep going. The rolled insert improves cleanout and adds another layer of strength to the floor, while the wear bars protect high-contact zones and extend the life of the bucket substantially.

The sides are constructed from 1/4-inch steel with 1/2-inch side braces welded in for extra reinforcement. These braces prevent flex and distortion when you're scooping into compacted material or working with heavy loads. The integrated step makes it easier to access your machine or check your load without climbing over the attachment. It's a small detail, but it's the kind of thing that matters when you're in and out of the cab all day.

You also get two cutting edge options depending on how you want to manage wear and replacement. Option 1 is a heavy-duty weld-on edge—3/4 x 8 inches—welded directly to the bucket shell. It's simple, strong, and ideal if you prefer to replace the edge by cutting and welding when the time comes. Option 2 is a bolt-on system: a 1/2 x 6-inch base edge welded to the shell with a 3/4 x 6-inch replaceable bolt-on edge. This setup makes edge replacement faster and doesn't require welding equipment in the field. Both options offer serious durability, so it comes down to your preference and maintenance setup.

The Series 3 Material Bucket comes standard with a universal skid steer quick attach plate, so it's ready to mount on most modern skid steers and compact track loaders right out of the crate. If you're running a different mounting system or need a custom setup, Stinger can accommodate that. They can also ship the bucket with a plain back if you want to weld your own custom mount. That flexibility is rare in off-the-shelf attachments and gives you control over how the bucket integrates with your fleet.

Forge Claw is proud to offer this attachment with shipping calculated at checkout, and we back every unit with the support and service you'd expect from a top-rated distributor. We work directly with operators, contractors, and landowners who need reliable equipment and straight answers. If you have questions about sizing, lead times, or compatibility, our team is here to help you get the right bucket for your machine and your work.

This isn't a light-duty utility bucket. It's a high-capacity workhorse designed for skid steers that spend their days moving serious material. From site prep to ag work to demolition cleanup, the Series 3 Material Bucket gives you the volume, the visibility, and the durability to keep your operation moving forward.

Specifications

• Available widths: 60", 66", 72", 78", 84"
• Bucket depth: 40 inches
• Shell material: 3/16" grade 50 steel
• Side material: 1/4" steel with 1/2" thick side braces
• Back angle: 68 degrees
• Cutting edge options: Weld-on (3/4" x 8") or Bolt-on (3/4" x 6" replaceable with 1/2" x 6" base)
• Wear bars: Four 4" wide x 1/2" thick bars (five on 78" and 84" models)
• Reinforcement: Top channel brace and rolled bottom insert
• Weight range: 614 lbs (60") to 780 lbs (84") with bolt-on edge
• Struck capacity range: 14.2 to 19.9 cubic feet
• Heaped capacity range: 17.8 to 23.8 cubic feet
• Mounting system: Universal skid steer quick attach (custom options available)
• Integrated step for operator access
• Country of Origin: USA

Features

• 40-inch bucket depth — increases capacity and keeps the cutting edge visible from the cab, reducing guesswork and improving grading accuracy
• 3/16-inch grade 50 steel shell — provides a durable, warp-resistant foundation that holds up under high-volume, high-impact use
• 68-degree back angle — optimized for excellent rollback and clean dumping across a wide range of skid steer and track loader models
• Reinforcement tube across the top — adds structural strength and maintains clear sightlines so you can see your work without obstruction
• Four heavy-duty wear bars — protect high-wear zones on the bucket floor and significantly extend service life in abrasive conditions
• Rolled bottom insert — strengthens the floor and improves material cleanout, reducing buildup and downtime between loads
• Two cutting edge options — choose weld-on for simplicity or bolt-on for fast, no-weld edge replacement in the field
• Integrated step — makes machine access and load inspection easier and safer throughout the workday

Benefits

The Series 3 Material Bucket saves you time by increasing your per-cycle capacity without forcing you to upsize your machine. With struck capacities ranging from 14.2 to 19.9 cubic feet and heaped capacities up to 23.8 cubic feet, you're moving more material per trip. That means fewer cycles, less fuel burn, and more loads completed in a day. When you're bidding jobs or managing tight schedules, that efficiency translates directly into profitability.

Durability is built into every weld and every plate. The grade 50 steel shell resists deformation under load, and the reinforced sides with 1/2-inch braces prevent the bucket from bowing or twisting when you're digging into packed dirt or frozen ground. The wear bars and rolled insert protect the areas that take the most punishment, so you're not replacing the bucket or making constant repairs. This is equipment that earns its keep over years, not months.

The 68-degree back angle gives you excellent dump performance without requiring aggressive hydraulic angles that can stress your machine or spill material prematurely. You get a controlled, clean release whether you're dumping into a truck bed, spreading gravel, or backfilling a trench. The bucket holds its load during transport and doesn't require constant adjustments to keep material from sliding forward. That stability makes you faster and more confident on uneven terrain.

Visibility matters more than most operators realize until they've worked with a poorly designed bucket. The 40-inch depth and top reinforcement tube on the Series 3 keep your sightlines open so you can see the cutting edge and the ground in front of you. You're not second-guessing your position or overcutting because you can't see where the edge is. That precision reduces rework, minimizes surface damage, and keeps your grading work clean the first time.

If you've ever dealt with edge replacement on a weld-on bucket, you know it can be a hassle. The bolt-on edge option gives you a faster, cleaner way to swap out a worn edge without grinding, cutting, or welding in the field. You unbolt the old edge, bolt on a new one, and you're back to work. It's a time-saver and a cost-saver, especially if you don't have a welder on-site or don't want downtime waiting for shop repairs. The weld-on option is still there if you prefer it, and it's built just as tough.

The integrated step isn't flashy, but it's practical. It gives you a solid foothold when you need to get in and out of the cab or inspect a load. It's safer than balancing on the cutting edge or climbing over the bucket, and it's one less thing to think about when you're working alone or in tight spaces. Small features like this reflect the kind of real-world thinking that goes into a well-designed attachment.

Shipping calculated at checkout from Forge Claw means you're not paying hundreds of dollars in freight costs just to get the bucket to your door. That's money you can put back into your business or your next piece of equipment. Combined with flexible financing options and the backing of a distributor that stands behind what we sell, you're getting a straightforward buying experience with no surprises and no runaround.

Additional Information

The Series 3 Material Bucket is ideal for contractors running mid- to full-size skid steers and compact track loaders on high-volume jobs. It's well-suited for excavation contractors, landscapers, site prep crews, farm and ranch operators, and demolition teams who need a bucket that can handle everything from topsoil and mulch to gravel, sand, and debris. If you're moving material daily and your current bucket isn't keeping up, this is the upgrade that makes sense.

Compatibility is straightforward. The universal skid steer quick attach plate fits most modern loaders, and if you're running a different mounting system or need a custom configuration, Stinger can accommodate that. Just reach out to Forge Claw before ordering so we can confirm fitment and lead times. If you're not sure which width is right for your machine, we can help you match the bucket to your loader's rated operating capacity and lift specs.

Operating the Series 3 is simple, but a few best practices will extend its life and keep it performing at its best. Avoid overloading beyond your machine's rated capacity, especially on uneven ground or slopes. Keep the cutting edge sharp or replace it when it's worn down to maintain digging performance and reduce strain on the loader. If you're working in wet or sticky material, clean out the bucket at the end of the day to prevent buildup and corrosion. Store the bucket off the ground when not in use to keep the cutting edge from sitting in moisture.

Maintenance is minimal. Inspect welds and wear bars periodically, especially after heavy use or impact. Check the cutting edge for excessive wear and replace it before it compromises the bucket shell. Grease any pivot points on your loader's quick attach system to ensure smooth operation. The rolled insert and reinforced construction mean there's less to worry about compared to lighter-duty buckets, but a few minutes of inspection after long jobs will catch small issues before they become big ones.

Warranty Info

Manufactured by Stinger Attachments, this product is covered under the manufacturer's 2-year warranty for defects in materials and workmanship. Forge Claw proudly stands behind every unit we sell and offers shipping calculated at checkout on all heavy machinery attachments. Order your Skid Steer Material Bucket – Series 3 (MB3) from Forge Claw today. We offer flexible, easy financing and shipping calculated at checkout so every operator can get their hands on top-quality equipment.