About this product
The Serv-Ware STGS-24 is a 24-inch thermostatic griddle sized for kitchens that griddle steadily but do not need a full six-foot flat top. Breakfast cafés, burger joints, diners with a small line and food trucks get two independent cooking zones in a counter-friendly footprint.
Two cast iron H-shaped burners rated at 30,000 BTU/hr each deliver 60,000 BTU/hr in total under a 3/4" thick steel griddle plate. Thermostatic controls let you set the plate anywhere from 200°F to 500°F.
What you will notice in day-to-day use
- Two zones, two temperatures. Each burner has thermostatic control, so you can keep one side hot for searing and the other lower for eggs, pancakes or holding.
- Steady, repeatable results. The thermostats hold the plate where you set it between 200°F and 500°F rather than drifting with load.
- Fast recovery. A 3/4" thick steel plate over cast iron H-shaped burners bounces back quickly after a load of cold product.
- Clean-up made simple. Fully welded stainless splashes on the back and sides, plus a removable stainless steel drip tray.
Choosing your setup
Gas type: the griddle is built for natural gas, and an LP conversion kit and regulator come in the box. An LP conversion kit and regulator are included, so a qualified installer can set it up for either fuel.
Gas Supply pressure Natural gas 4" W.C. LP (propane) 10" W.C.Specifications
Brand Serv-Ware Model STGS-24 Type Countertop griddle, thermostatic controls Burners 2 x 30,000 BTU/hr cast iron H-shaped burners Total input 60,000 BTU/hr Controls Thermostatic, 200°F – 500°F; standby pilot Griddle plate 3/4" thick steel Splash guard Fully welded stainless steel back and side splash Grease management Removable stainless steel drip tray Gas type Built for natural gas; LP conversion kit and regulator included Supply pressure 4" W.C. natural gas; 10" W.C. LP Gas connection 3/4" Construction Stainless steel front and sides; chrome-coated zinc alloy knobs Legs Stainless steel, adjustable heavy duty Dimensions (W x D x H) 24" x 30" x 16-1/4" Shipping weight 225 lbBefore it arrives
- Gas: connects with a 3/4" gas line; have a qualified installer hook it up and fit the included LP kit and regulator if you run propane.
- Ventilation: install under a commercial hood following your local code.
- Counter or stand: set it on a sturdy, non-combustible counter or equipment stand that can carry a unit that ships at about 225 lb.
Warranty
One year parts and labor, counted from installation (up to 18 months from shipment), with labor coverage valid in the United States for commercial use, from Serv-Ware.
Specifications per Serv-Ware data; subject to change by the manufacturer.
Description supplied by Nishi Enterprise Inc through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
