About this product
Getting an ET-C power head back together sometimes comes down to a single fixing, and 0110TL is that one: an M5 x 25 cross-recessed pan head machine screw to DIN 7985, ordered on its own rather than in a strip of ten.
Because it takes a metric thread rather than cutting its own, the fit is decided by the seat it goes into, and a self-tapper of similar size is not a substitute at all. Drive the wrong pattern into a tapped hole and the original thread is ruined in one turn. Check the thread on the screw you removed before ordering: a machine screw has a uniform, evenly spaced thread running to a blunt end, where a tapping screw is coarser and usually tapers. Replacement is called for when the cross recess has opened up under a slipping driver, or when a screw has been bent or cross-threaded during a brush change.
Ordering one at a time suits this fastener because it rarely fails in groups. Machine screws in a tapped seat can be removed and refitted many times over the life of a power head, so the fixings on either side of a damaged one are usually still serviceable, and there is nothing to gain from replacing them alongside it. Where several have been damaged at once, which usually means a driver of the wrong size was used across the whole set, the ten-pack listed as 0110TER is the better call.
- Part number: 0110TL
- Pack: sold as one screw
- Specification: AM5 x 25 cross-recessed pan head machine screw to DIN 7985
- Thread: metric machine thread, not self-tapping
- Fits: SEBO ET-C power heads
- Ten of the same screw: 0110TER
- Longer version of the same head: 0111 at M5 x 30
Genuine SEBO hardware from an authorized dealer; ships in 2–5 business days. Covers searches for a single SEBO ET-C screw, an M5 x 25 vacuum machine screw or part 0110TL.
Description supplied by Vacuums and More through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






