About this product
Product Description
The SCHAEFER BRUSH 14444 is a long-handle stainless steel wire tube brush designed for cleaning the interior of tubes, pipes, and bores. The brush head measures 3 inches in length with a 3/8-inch diameter, and the overall assembly extends 27 inches, giving technicians the reach needed to clean deep into tubing without awkward positioning. Wire diameter is 0.005 inches, providing fine, flexible cleaning action suited for light-to-moderate fouling, scale, and debris removal. The single-spiral fill pattern distributes bristle contact evenly around the tube wall. The 0.145-inch stainless steel shank resists corrosion and holds up in wet or chemical environments. Licensed plumbers, HVAC technicians, and pipefitters commonly use this type of brush during maintenance and installation work.
This tube brush is well suited for use in residential and light commercial maintenance applications where stainless steel fill material is required to prevent contamination or corrosion in service environments. Typical uses include cleaning copper, stainless steel, and similar tubing during heat exchanger service, boiler maintenance, condenser tube cleaning, and general pipe interior preparation. The extended 27-inch overall length makes it practical for reaching into assemblies where short-handle brushes cannot access the full tube depth. The 3/8-inch brush diameter targets common small-bore tubing sizes found across HVAC and plumbing systems.
Key Features
- 3-inch brush length with 3/8-inch diameter for small-bore tube cleaning
- 27-inch overall length provides deep reach into tube assemblies
- Stainless steel fill wire resists corrosion and contamination in wet service environments
- Single-spiral construction with 0.005-inch wire diameter for even, flexible bristle contact
- Stainless steel shank at 0.145-inch diameter for rigidity and corrosion resistance
- Lightweight at 0.15 pounds for extended use without fatigue
Compatibility
Designed as an OEM-style long-handle wire tube brush suitable for cleaning tubes and bores with an interior diameter of approximately 3/8 inch across a range of HVAC, plumbing, and industrial piping applications.
Installation Notes
This brush is used by licensed plumbers, HVAC technicians, and pipefitters during routine maintenance and installation procedures. Always depressurize and drain the system before inserting any cleaning tool into live piping or tubing. Insert the brush with steady, controlled strokes to avoid bending the shank or dislodging bristles inside the tube. Dispose of any debris cleared from the tube interior before returning the system to service.
Technical Specifications
- Brush Length: 3 inches
- Brush Diameter: 3/8 inches
- Overall Length (OAL): 27 inches
- Wire Diameter: 0.005 inches
- Shank Diameter: 0.145 inches
- Fill Material: Stainless Steel
- Shank Material: Stainless Steel
- Spiral Type: Single
- Number of Bristle Spirals: 1
- Number of Stem Wires: 1
- Weight: 0.15 pounds
Standard Information
- Brand: SCHAEFER BRUSH
- Manufacturer Part Number: 14444
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






