About this product
Key Features
Overview
The SawStop BTS-P-80HATB2 10 in. 80-Tooth Titanium Series Premium Woodworking Table Saw Blade is a fine-cut table saw blade built for woodworkers who care about cut quality, clean edges, and long blade life. This is a table saw blade designed for fine woodworking, finish crosscuts, plywood cutting, and solid-surface work. Model Number: BTS-P-80HATB2. If your job is cabinet parts, trim components, veneered sheet goods, or melamine where chipped edges cost time, this blade is aimed right at that kind of work.
The 80-tooth design and high alternate top bevel tooth geometry are what make this blade different from a general-purpose rip-and-crosscut blade. More teeth means the blade takes smaller bites, which helps leave a smoother edge on plywood, hardwood, softwood, and laminated materials. SawStop also lists a negative 5-degree rake angle and a 40-degree top angle, which tells you this blade is tuned for controlled, accurate cutting rather than aggressive feeding. In plain terms, it is meant to leave a better finish, not bulldoze through stock.
On the build side, this blade is precision balanced, fully tensioned, and heat treated. Those details matter because a blade that stays stable under load cuts truer and leaves a cleaner surface. Oversized tungsten carbide teeth are there for wear resistance, and they can be resharpened multiple times. That is important for anyone running production work or doing enough finish cutting that throwing away cheap blades gets expensive fast.
The Titanium Nitride coating is not just there for looks. It helps reduce friction and wear, which supports smoother cuts and can help keep heat under control during longer sessions at the saw. SawStop also uses laser-cut expansion slots to reduce vibration, noise, and heat buildup. That combination matters when you want the blade to stay consistent across repeated cuts, especially in sheet goods where wandering or chatter shows up immediately on the edge.
Fitment is straightforward: this blade uses a 10-inch diameter with a 5/8-inch arbor, which is the standard setup on many table saws. The kerf is listed at 0.102 inch, with tooth thickness at 0.098 inch, and the maximum operating speed is 7,200 RPM. Those are the numbers to check against your saw before buying. The result is a blade that fits a wide range of compatible table saws while staying focused on fine woodworking rather than rough framing or heavy ripping.
This blade makes the most sense for cabinet shops, finish carpenters, furniture builders, remodeling pros, and serious DIY woodworkers who want better results straight off the saw. If most of your cuts are in hardwood panels, veneered plywood, melamine, or solid-surface materials, the SawStop BTS-P-80HATB2 10 in. 80-Tooth Titanium Series Premium Woodworking Table Saw Blade is the kind of upgrade you notice right away in edge quality. If you mainly rip thick framing lumber all day, you would likely want a more aggressive blade. But for clean finish work, this is the right kind of setup.
Smooth Cuts Where Finish Quality Matters
This blade is set up for the kind of work where the cut edge matters as much as the cut itself. The tooth count, bevel geometry, and thin finish-focused kerf work together to leave cleaner edges in sheet goods and trim stock.
- 80-tooth layout for smoother crosscuts and refined finish work
- High alternate top bevel tooth configuration for clean cutting in plywood, hardwood, and softwood
- Negative 5-degree rake angle favors controlled, accurate cuts
- Rated up to 7,200 RPM for use on compatible table saws
What's in the Box
- (1) SawStop 10 in. 80-Tooth Table Saw Blade
Key Specifications
Compatibility
Built For
Pro Tip
Use this blade for your finish passes and sheet-good work, then keep a more aggressive rip blade on hand for thick stock. You will get better cut quality from the 80-tooth setup and avoid forcing a fine-cut blade into jobs it was not built for.
Warranty & Support
Tool Nut's Take
Why the SawStop BTS-P-80HATB2 10 in. 80-Tooth Titanium Series Premium Woodworking Table Saw Blade Earns Its Keep
This is the kind of blade you buy when edge quality matters enough that sanding, chip-out repair, and second passes are costing you time.
- Who it's for: Cabinetmakers, trim carpenters, furniture builders, and serious DIY woodworkers doing clean finish work in plywood, melamine, hardwood, and softwood.
- Why it stands out: The combination of 80 teeth, high alternate top bevel geometry, laser-cut expansion slots, tungsten carbide teeth, and Titanium Nitride coating is aimed squarely at smooth, accurate cuts and long service life.
- Worth knowing: This is a fine-cut blade, not your do-everything blade. If most of your day is heavy ripping, pair it with a dedicated rip blade and let this one handle the work where the surface finish counts.
Common Questions
- What kind of saw is this blade made for? It is designed as a 10 in. table saw blade with a 5/8 in. arbor.
- What materials is it intended to cut? It is built for woodworking and is specifically suited to plywood, melamine, hardwood, softwood, and similar finish-cut materials.
- Can the teeth be resharpened? Yes. SawStop states the high-grade tungsten carbide teeth can be resharpened multiple times.
- What is the maximum rated speed? The blade is rated for a maximum operating speed of 7,200 RPM.
Description supplied by Tool Nut through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.