RPM Maverick R Extended Capacity 19 Gallon Replacement Fuel Tank

Maverick R Extended Capacity 19 Gallon Replacement Fuel Tank

Say goodbye to range anxiety and keep the throttle pinned longer with the RPM SXS 19-Gallon OEM Replacement Fuel Tank for the Can-Am Maverick R! It is no secret that the 240HP Rotax 999T engine loves to drink fuel—and once you flash a performance ECU tune, increase boost pressures, or convert to thirsty alternative fuels like E85, your miles-per-gallon vanish rapidly. RPM’s precisely engineered, cross-linked rotomolded replacement tank expands your on-board fuel volume from a modest factory 13 gallons to a massive 19 gallons, delivering nearly 50% more driving range to conquer long desert loops, remote mountain passes, and endurance races without carrying dangerous fuel jugs or cutting rides short.

Factory Fitment & Zero Compromises

Expanding your Maverick R to a true 19-gallon onboard capacity requires zero hacks, zero lost cab space, and zero permanent modifications:

• Retains Every Interior Panel & Feature: Every single factory interior trim piece and dash panel stays in place. You retain 100% of your factory glovebox storage space, with no cutting, trimming, or bending of chassis metal or plastic bodywork.

• 100% OEM Hardware Integration: Reuses your factory OEM fuel pump assembly, rubber tank hold-down straps, filler neck, fuel cap, seal, and primary breather lines. No clumsy aftermarket straps or universal self-tapping screws.

• Smart System Module Clearance: Precision-molded clearance pockets retain the factory Smart Control Module and primary fuse block right in their designated OEM positions.

• Enhanced Fuel Gauge Calibration: The factory fuel level float sender drops straight in and reads true, providing an even more linear and accurate dash fuel gauge readout across the entire 19-gallon range than the factory tank.

• OEM Windshield Wiper Compatible: Engineered, tested, and guaranteed to clear the Can-Am factory electric windshield wiper and washer kit with zero clearance interference.

Baja-Tested & Built Overkill

Manufactured from 7.5mm thick, high-impact, ethanol-safe rotomolded polymer, the RPM high-capacity fuel tank provides exceptional puncture, gouge, and abrasion resistance compared to the thin OEM unit. Tested and abused in the brutal terrain of Baja by elite off-road racers, this tank is built to survive extreme rock strikes, G-outs, and aggressive chassis flex.

For maximum driver safety, each tank integrates an OEM-style one-way rollover check valve secured by a rigid, CNC-machined 6061 billet aluminum retention block, preventing fuel leakage during rollover situations while allowing positive tank breathing.

Technical Specifications & Capacity Metrics:

• Fuel Capacity: 19 Gallons / 72 Liters (+6 Gallons over OEM 13-Gallon capacity)

• Wall Thickness: 7.5mm Heavy-Duty Impact-Resistant Rotomolded Polymer

• Fuel Compatibility: Safe for Pump Gas, Race Gas, Ethanol, E85 Blends, and Methanol Mixtures

• Safety Architecture: 1-Way Rollover Check Valve with CNC 6061 Billet Aluminum Retention Block

• Sensor & Pump Integration: 100% Direct Drop-in for OEM Fuel Pump & Level Sender Module

• Accessory Clearance: Fully compatible with Can-Am OEM Windshield Wiper Kit

Features:

• Massive 19-Gallon On-Board Capacity: Adds 6 extra gallons (+46% capacity) to eliminate range anxiety on long rides and high-consumption E85 builds.

• 100% Direct Drop-In Fit: Reuses stock fuel pump, factory rubber mounting straps, OEM filler neck, and factory gas cap.

• Zero Lost Cabin Space: Preserves complete passenger legroom, OEM footwells, and factory glovebox utility.

• Smart Module Compatible: Retains OEM mounting locations for the factory Smart Control Module and main fuse block.

• 7.5mm Rotomolded Construction: Drastically thicker than OEM plastic for superior puncture resistance against trail rocks and roost.

• Race-Proven Rollover Protection: Factory-style rollover safety valve retained by a rugged 6061 billet aluminum locking plate.

• Linear Fuel Level Readout: Works directly with the stock digital dashboard gauge for smooth, reliable level tracking.

• Factory Wiper Clearance: Formed with dedicated clearance to work seamlessly alongside OEM windshield wiper setups.

What's Included:

• (1) RPM SXS 19-Gallon Rotomolded High-Capacity Replacement Fuel Tank

• (1) Heavy-Duty One-Way Rollover Vent Safety Valve

• (1) CNC-Machined 6061 Billet Aluminum Rollover Valve Retention Block

• (1) Complete Retaining Hardware Installation Pack

Fitment:

Direct replacement for all 2-seat and 4-seat Can-Am Maverick R models:

• Can-Am Maverick R (2-Seat): 2024–2026 (Base, X, X RS, X RS with Smart-Shox)

• Can-Am Maverick R MAX (4-Seat): 2024–2026 (All Model Trims & Packages)

📝 FITMENT NOTE: 2026+ model year machines require the simple removal of the lower intrusion panel for tank clearance during installation.