About this product
This is an 11 mm E-clip, sold as part A732-2400, used across Riccar's PV series and Simplicity's MV series uprights. Shaped like the letter E, this clip is a compact spring-steel ring that seats into a cut groove on a shaft, locking whatever rides on that shaft, an axle, a roller, or a linkage pin, so it cannot slide free. Fitting one takes a light push with a flat-blade tool or a dedicated E-clip pliers until the ring seats fully in the groove; removing one is what usually sends it flying across the workbench.
These clips are among the easiest small parts to lose during a teardown, since the open end can catch a screwdriver and launch the clip well past where you are looking, so it is worth ordering more than one if you are already inside the machine. A missing E-clip on a wheel or roller axle shows up as side-to-side play that was not there before, and on a linkage pin it can let the whole assembly work loose over time.
- Size: 11 mm
- Type: external retaining clip
- Fits: BRLS, BRLD, R40, R40.2, RAD, R21, S40, S40.2, SCRS, X9, G9 and SYMPBP.2, plus about thirty more Riccar and Simplicity models
- Sold: each
Measure the clip you removed against this 11 mm size before ordering, since several other clip sizes are used across these models and they are not interchangeable.
Description supplied by Vacuums and More through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.


