Rear Pair Struts Shocks For 2011-2015 Chevrolet Cruze Volt Left Right ECCPP

Feature
1. Guaranteed Exact Fit for easy installation

2. 100% BRAND NEW and tested to meet or exceed OEM specifications

3. Premium ISO/TS 16949 quality - guaranteed highest quality available

4. Engineered for superior durability, backed by industry leading warranty

5. These are brand new, not used or junkyard parts.

6. Each complete assembly is built to meet or exceed exact OEM specifications.

7. High corrosion resistance and long service life. Steel rod is mirco-polished with double chrome plate.

8. Newer Valving technology operates in stages based on the velocity of the car.

9. Use Teflon bonded piston seal to keep friction down and temperature cooler so that valving stays firmer.

Product Specifics
Brand: ECCPP
Manufacturer Part Number: E11833901P
Type: Strut Assembly
Fitment Type: Direct Replacement
Placement on Vehicle: Rear+Left+Right
Manufacturer Warranty: Lifetime
Custom Bundle: Yes
Features: 100% Accuracy of Fit
Modified Item: No
Adjustable: No
Gas Charged Shock: Yes
Interchange Part Number: 348032
OE/OEM Part Number: 5663
Bundle Listing: Yes
Bundle Description: Rear Shocks
Included Hardware: Mounting Hardware
Surface Finish: Gloss Black
Return Policy: Free return or replacement within 30 days
Pieces: 2
Shock Absorber System: Double Pipe
Shock Absorber Type: Gas
Vintage Car Part: No
Material: Steel
Mounting Style: Screw-On
Performance Part: No
Superseded Part Number: Shock Absorber and Strut Assembly
Universal Fitment: No
Installation
Step 1: Before you lift the vehicle, loosen lug nuts one full turn.

Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.

Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help

keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt.

Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.

Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need

replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc).

Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!

Opening brake lines will require bleeding of the brake system.

Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in

expensive and time consuming repairs.

Step 7: Remove sway bar attached to the strut assembly or control arm.

Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).

Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor

may need to be removed to gain access.

Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the

center retaining nut! It is not safe to unload the spring from the assembly in this position.

Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down

on your brake line, rotor or drum.

Note
The struts/shocks are nitrogen gas charged and tuned for each specific vehicle application.

They will greatly improve the ride, handling,and safety of your vehicle!

Please consult the compatibility table and specifics above for the correct fitment for your Vehicle.

_Package Include: 2X Shocks Struts _Rear Left Right__

We'll ship the struts separately in two pakages if the full set is over weight. Notice please!