Skip to main content

ProTeam One-Bend Chrome Tapered Wand (54") - 1-1/2 to 1-1/4 in.

Sold by Vacuums and More

Sponsored
ProTeam One-Bend Chrome Tapered Wand (54") - 1-1/2 to 1-1/4 in.
$58.99

Opens evacuumsandmore.com in a new tab. The seller handles checkout, shipping, and returns.

We may earn a commission when you buy through product links. Sponsored labels identify paid placements from Shopify. We select the Weekly Edit independently. How we make money

Price and availability requested live for this page. Final details are set by the seller.

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

ProTeam's one-bend chrome tapered wand, part 100136, measures 54 inches and steps down from a 1-1/2 inch fitting at the hose end to a 1-1/4 inch fitting at the tool end. That taper is what lets a standard 1-1/2 inch ProTeam hose drive smaller tools, a 1-1/4 inch turbo brush among them, with no separate reducer in between.

The single bend does the other half of the work. It sets the tool angle for floor cleaning without adding a second joint that could work loose, so there is one less connection to check when suction goes soft. Both ends are friction fit, which keeps the wand quick to swap between tools but leaves it to the operator to seat each joint fully.

That is where most of the trouble comes from. A wand left slightly proud of the hose cuff leaks at the joint, and a tool that has not been pushed the whole way onto the wand end leaks in exactly the same manner, so a drop in suction that seems to come from nowhere is worth chasing at both couplings before anything further upstream is suspected.

  • Part number: 100136
  • Length: 54 inches
  • Taper: 1-1/2 inch hose end down to 1-1/4 inch tool end
  • Connection: friction fit at both ends
  • Finish: chrome, one bend

Push each joint home and give the wand a light twist to confirm it has seated before starting a pass. A joint that has gone slack over a shift is worth pushing home again rather than treated as a fault, since friction fits loosen with use and reseat without any parts being needed.

Description supplied by Vacuums and More through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

Keep exploring

Related current listings to open on StorkScout and compare before visiting a seller.