About this product
Fitment Notes:
- Fits All 2017-2021 Honda Civic Type-R Models Including RHD, International Models, Etc
- Fits Factory Charge Piping Or Pair With Our Charge Pipe Upgrade Kit For Optimal Performance
Please Read Before Ordering:
- Does Not Require Tune
- Current Design Retains Factory Intercooler Bolts & Hardware
Technical Notes:
- It's no secret that Honda's 2.0L turbo Civic is extremely susceptible to heat-soak, especially when retaining the factory intercooler. Excessive heat-soak increases the risk of detonation and causes major power-loss due to high charge air and cylinder temperatures. These issues become even more prevalent with spirited driving and/or increased power outputs.
- The PRL Motorsports intercooler upgrade decreases charge air temperatures while increasing potential airflow with its dense 26.5 x 3.5 x 7.25" 550+ horsepower rated bar-and-plate core. Our intercooler core which increases surface area by 85% and internal flow by 83% to allow optimal cooling and airflow. Billet machined aluminum end tanks maximize efficiency while looking as smooth as they flow!
- This intercooler utilizes factory mounting spots with our billet machined end tanks as well as all factory air ducts/shrouds. To maintain consistency with most of our PRL product line, no cutting, fitting or trimming is required. Kits will come with all hardware needed for a seamless install.
Kit Includes:
- (1) Intercooler Assembly
- (1) Cardboard Stencil w/ "PRL" Logo
- (1) Cardboard Stencil w/ 'R "PRL" Logo
- (2) Buna O-Ring
Performance Gains:
- Increased turbocharger spool
- 3 horsepower & 11 ft/lb torque gains by simply bolting on
- Major mid-range power gains
- 50+ F degree drop in post charge air temperature at peak
- Average of 32 F degree drop in post charge air temperature
- Increased efficiency & consistency in power delivery
- Increased engine safety
Intercooler to Charge Pipe Bolt(s) Torque Spec: 18 ft/lb
- Fits All 2017-2021 Honda Civic Type-R Models Including RHD, International Models, Etc
- Fits Factory Charge Piping Or Pair With Our Charge Pipe Upgrade Kit For Optimal Performance
Please Read Before Ordering:
- Does Not Require Tune
- Current Design Retains Factory Intercooler Bolts & Hardware
Technical Notes:
- It's no secret that Honda's 2.0L turbo Civic is extremely susceptible to heat-soak, especially when retaining the factory intercooler. Excessive heat-soak increases the risk of detonation and causes major power-loss due to high charge air and cylinder temperatures. These issues become even more prevalent with spirited driving and/or increased power outputs.
- The PRL Motorsports intercooler upgrade decreases charge air temperatures while increasing potential airflow with its dense 26.5 x 3.5 x 7.25" 550+ horsepower rated bar-and-plate core. Our intercooler core which increases surface area by 85% and internal flow by 83% to allow optimal cooling and airflow. Billet machined aluminum end tanks maximize efficiency while looking as smooth as they flow!
- This intercooler utilizes factory mounting spots with our billet machined end tanks as well as all factory air ducts/shrouds. To maintain consistency with most of our PRL product line, no cutting, fitting or trimming is required. Kits will come with all hardware needed for a seamless install.
Kit Includes:
- (1) Intercooler Assembly
- (1) Cardboard Stencil w/ "PRL" Logo
- (1) Cardboard Stencil w/ 'R "PRL" Logo
- (2) Buna O-Ring
Performance Gains:
- Increased turbocharger spool
- 3 horsepower & 11 ft/lb torque gains by simply bolting on
- Major mid-range power gains
- 50+ F degree drop in post charge air temperature at peak
- Average of 32 F degree drop in post charge air temperature
- Increased efficiency & consistency in power delivery
- Increased engine safety
Intercooler to Charge Pipe Bolt(s) Torque Spec: 18 ft/lb
Description supplied by EZmotorsport through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
