PPE Silicone Hoses and Stainless Steel Clamps, 2006-2010 LBZ/LMM

Each PPE Performance Silicone Hose is strengthened with 5 plies of Nomex reinforced fibers making them very tough. Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures they can withstand constant boost pressures and temperatures from -76 degrees all the way to +437 degrees Fahrenheit. PPE silicone will maintain structural integrity even when subject to high boost pressures throughout the temperature range. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will.

PPE’s Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application.

Drag racing and sled pulling place huge stress on your truck’s silicone hoses in a very short period of time. PPE’s hoses were designed to handle the rigors of increased pressures during racing and competition. Their performance tolerances make them an excellent upgrade for your daily driving and the extremes of towing heavy loads.

Features:

• Working pressure: 70 psi - BAR 4.8

• Burst pressure: 207 psi - BAR 14.3

• UV and Ozone resistant

• Handles high boost-pressures, oil and fuel, high-temperatures

• Higher flow and better lubricity than rubber

• 5-ply, 6mm wall thickness

DmaxStore Note:

• Due to the 6mm wall thickness, hose clamps must be 1/2 inch larger diameter than hose ID for proper fit.