Polaris RZR Trail S 1000 Plow Pro Snow Plow

Clearing snow by hand gets old fast. A snow plow turns your Polaris RZR Trail S 1000 into a real workhorse, letting you push through driveways and parking lots without breaking a sweat. This SuperATV plow kit comes ready to bolt on, with a 72-inch blade that tilts to seven different angles so you can push snow straight ahead or to either side.

The kit includes the 72-inch blade, a quick-connect mount that lets you add or remove the blade in seconds, and the steel frame that bolts to your machine. Everything fastens together without drilling—just bolt it on and you're done. The mount stays put year-round if you want, so setup when winter hits takes only minutes.

Snow plowing isn't gentle on equipment. The blade itself is 10-gauge steel with a reinforced 4-gauge cutting edge to power through packed snow and ice. Multiple vertical and horizontal support ribs run across the back, keeping everything rigid under pressure. The whole system uses shock springs and a flip-forward design to absorb hits from rocks, stumps, or whatever else is buried in the snow.

• 10-gauge steel blade with 4-gauge cutting edge
• Two vertical ribs and horizontal reinforcement
• Flip-forward shock absorption
• Winch-operated system

You get full control over blade angle—0, 10, 20, or 30 degrees left or right of center. The blade also tilts from 52 to 65 degrees for the right bite, and height-adjustable skid shoes let you fine-tune clearance to the ground. Winch control makes angle changes quick and responsive.

The optional deluxe kit gives you side shields made from 3/16-inch steel to keep snow in line, twenty-three markers so the blade edges stay visible, a deflector (1/8-inch LDPE) to stop snow from rolling over the top, and a dash-mounted angle actuator with an 1,800 lb. motor. That lets you adjust the blade from inside without stopping.

• You'll need a winch already installed to operate the plow
• Fits Polaris RZR Trail S 1000, 2021 and newer
• If your machine sits more than 3 inches higher, add the drop bracket (SPB-DB-001) for proper clearance
• Won't work with Polaris High Coverage Bumper #2884732-293