A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

About this product

Portable Hardness Tester Accessories/HLD-HLG Hardness Test Blocks/Probes for Portable Hardness Testers

Shipped directly from PHASE II+ in NJ, USA

A full compliment of Accessories for portable hardness testers including:

Impact Devices/Probes and probe attachments
Ring Sets
Portable Hardness Tester Blocks/Hardness Test blocks

Impact Devices:

D-Probe: MODEL NO. PHT1800-100

Universal standard unit. Will handle the majority of hardness testing applications.
Weight:75g

D+15-Probe: MODEL NO. PHT1800-110

Very narrow contact area with a set back measurement coil. This device is used to measure hardness in grooves and recessed surfaces.
Weight: 80g

DL -Probe: MODEL NO. PHT1800-115

This model features a needle front section with a diameter of 4mm and a length of 50mm. It is suitable for testing in extremely confined spaces, the base of grooves and on special components such as as gear wheels. For use on steel and cast steel only!

DC-Probe: MODEL NO. PHT1800-120

Very short impact device for those confined areas, i.e. inside bores for internal measurements. Conforms to the D measuring range. Weight: 50g

G-Probe: MODEL NO. PHT1800-125

This device has an enlarged test tip, and an increased impact energy range (approx. 9 times the D, 72 ft-lb.). Can be used on lower quality finishes for measuring hardness in the Brinell range only (max. 650 HB). Designed to be used with heavy components such as heavy castings and forgings.
Weight: 250g

C-Probe: MODEL NO. PHT1800-130

A reduced impact energy impact device(approximately ¼ of the D Type 2 ft-lb.) for measuring the hardness of surface hardened components, coatings, thin wall or impact sensitive components. Applies a small superficial indentation.
Weight: 75g

Technical Data for Portable Hardness Tester Impact Devices

Note: Impact device D is standard device on all models. Specification is identical.

Display type D/DC/DL D+15 C G Impact energy 11Nmm 11Nmm 3Nmm 90Nmm Mass of the impact body 5. 5g 7. 8g 3. 0g 20g DL: 7.3g Test tip * Hardness 1600HV 1600HV 1600HV 1600HV * Diameter 3mm 3mm 3mm 5mm * Material Tungsten Tungsten * carbide carbide Impact device * Diameter 20mm 20mm 20mm 30mm * Length 147/86mm 162mm 141mm 254mm * Weight 75/50g 80g 75g 250g Max. hardness of sample 940HV 940HV 1000HV 650HB Preparation of surface * Roughness class ISO N7 N7 N5 N9 * Max. roughness depth Rt 10 µ m 10 µ m 2.5 µ m 30 µ m * Average roughness Ra 2 µ m 2 µ m 0. 4 µ m 7 µ m Min. weight of sample * Of compact shape 5kg 5kg 1.5kg 15kg * On solid support 2kg 2kg 0.5kg 5kg * Coupled on plate 0. 1kg 0. 1kg 0. 02kg 0. 5kg Min. thickness of sample * Coupled 3mm 3mm 1mm 10mm * Min. thickness of layers 0. 8mm 0. 8mm 0. 2mm – * Indentation of test tip * With 300 HV * Diameter 0. 54mm 0. 54mm 0. 38mm 1.03mm * Depth 24 µ m 24 µ m 12 µ m 53 µ m * With 600 HV * Diameter 0. 45mm 0. 45mm 0. 32mm 0.90mm * Depth 17 µ m 17 µ m 8 µ m 41 µ m * With 800 HV * Diameter 0. 35mm 0. 35mm 0. 30mm – * Depth 10 µ m 10 µ m 7 µ m –

Description supplied by Accusize Industrial Tools through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.

Keep exploring

Related current listings to open on StorkScout and compare before visiting a seller.