Skip to main content

Penofin Stain & Sealer, Semi-Transparent Penetrating Oil for Decks, Siding & Fences

Sold by The Paint People

Penofin Stain & Sealer, Semi-Transparent Penetrating Oil for Decks, Siding & Fences, image 1 of 2
1 / 2
$60.00
4.9(19)

Opens thepaintpeople.com in a new tab. The seller handles checkout, shipping, and returns.

We may earn a commission when you buy through product links. Sponsored labels identify paid placements from Shopify. We select the Weekly Edit independently. How we make money

Price and availability requested live for this page. Final details are set by the seller.

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

Penofin Stain & Sealer – Semi-Transparent Penetrating Oil for Decks, Siding & Fences

Penofin Stain & Sealer is a penetrating, oil-based semi-transparent wood stain and sealer in one. It's one of the easiest deck stains to apply: no wiping, no back-brushing on vertical surfaces, no laps or streaks, and you can apply it in direct sun and high heat. It stands up to rain within minutes and protects against water, UV, mold and mildew without cracking, chipping or flaking.

Key Features

  • Apply in direct sun and heat with no effect on performance.
  • Rain-resistant within minutes of application.
  • No wiping, laps or streaks, and no back-brushing on vertical surfaces.
  • UV, water, mold and mildew protection in a matte finish.
  • Over 80% solids and low VOC (under 100 g/L).
  • Easy upkeep: clean and reapply, with no sanding or stripping.

Where to Use It

Exterior decks, steps, railings, siding, fences and outdoor furniture. Not over paint, solid stains or other film-forming finishes. Strip those first. Exterior use only.

Colours and Size

3.79 L in Natural Tone, Natural Cedar, Redwood, Mission Brown, Dark Walnut and Ebony.

Penofin or Messmer's UV Plus?

Both are penetrating oils that won't peel. Penofin is the easier application: it can go on in full sun, shrugs off rain within minutes and needs no wiping. Messmer's UV Plus goes on in one coat with more colour choices, and comes in an 18.9 L pail for large jobs.

Specs & Coverage
  • Smooth wood: about 125–175 sq ft per 3.79 L
  • Rough or very porous wood takes more
Type Penetrating oil: long oil alkyd and mineral oil Opacity / sheen Semi-transparent, matte Coats 2 thin coats, or 1 heavy coat Recoat 1 hour between coats Dry time About 24 hours, depending on thickness, temperature and humidity Full cure 72 hours before heavy use or furniture Application temperature 4–32 °C (40–90 °F) Solids Over 80% by volume VOC Under 100 g/L Application Brush, roller, pump sprayer or airless sprayer Clean-up Mineral spirits or paint thinner
Application Guide
  1. Strip old film finishes. Remove any paint, solid stain or film-forming sealer by sanding or chemical stripping.
  2. Clean the wood. Use a deck cleaner on new wood, and a cleaner plus brightener on weathered wood. Let it dry completely.
  3. Let new wood season until its moisture content is under 12%. Lightly sand off any loose fibres.
  4. Apply by brush, roller, pump sprayer or airless sprayer at 4–32 °C. Full sun is fine.
  5. On decks and other flat surfaces, spread out any puddles with a rag, brush or roller. Vertical surfaces need no back-brushing.
  6. Second thin coat after 1 hour, or apply one heavier coat.
  7. Wait 72 hours before heavy foot traffic or putting furniture back.
FAQ
1How much Penofin do I need for my deck?

Plan on 125–175 sq ft per 3.79 L for two thin coats on smooth wood. A 300 sq ft deck usually needs 2–3 gallons, plus more for railings, steps and rough boards.

2Can I really apply it in direct sunlight?

Yes. Penofin says heat and direct sun have no effect on how it performs, as long as you're between 4 and 32 °C.

3What if it rains after I stain?

Penofin Stain & Sealer withstands rain and water within minutes of application, so a surprise shower won't ruin the job.

4Do I need to wipe off the excess?

No wiping is needed, and vertical surfaces don't need back-brushing. On decks, just spread out any puddles with a rag, brush or roller.

5Can I put it over my old deck stain?

Only over a penetrating oil like itself. Paint, solid stains and film-forming sealers must be stripped first so the oil can soak in.

6How do I maintain it?

Clean it each season. When the colour looks dull or faded, clean and reapply. There's no sanding or stripping between coats.

7Penofin or Messmer's UV Plus?

Choose Penofin for the easiest application in sun or changeable weather. Choose Messmer's UV Plus for one-coat application, more colours and an 18.9 L pail.

Description supplied by The Paint People through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.