PALADIN / BRADCO Ground Shark™ SD Brush Cutter for skid steer loaders

DESCRIPTION

7/25

* This attachment requires a safety door during operation. Please call if you can't find one or if you have questions.

Ground Shark™ SD Brush Cutter – Standard Duty Performance, Built to Last

The Ground Shark™ SD Brush Cutter is your go-to solution for clearing light to medium-density brush and hardwoods up to 4 inches in diameter. Designed for routine land maintenance, this standard-duty cutter features a direct drive motor for smooth, quiet, and efficient operation—even in tough conditions.

With a low-profile deck, the Ground Shark™ easily slips under fences and tight spaces, while the up to 78" cutting width and three bi-directional forged steel blades ensure fast, clean cuts through a variety of vegetation.

Key Features:

• Cuts Material Up to 4” in Diameter

• Up to 78" Cutting Width

• Direct Drive Motor – Smooth, reliable, low-maintenance performance

• 3 Bi-Directional Forged Steel Blades – Cut both ways to extend life and reduce wear

• Dual Pressure Relief Valves – Protect the hydraulic system from pressure spikes

• Quick & Safe Blade Shutdown – Audible alert during blade stop for added operator safety

• .25” Thick Steel Deck – Built tough for long-term durability

• Replaceable Bolt-On Skid Shoes – Easy maintenance and cost-effective repairs

• Low-Profile Design – Maneuvers easily under fences and low-clearance areas

• Deck Steps on Both Sides – Convenient for any carrier configuration

• Flexible Hose Routing – Configurable for left or right-side setup

• Deck Leading Edge Radius Guide – Smooth material flow and better control

Optional Add-Ons:

• MulchPower™ Gauge – Helps operators avoid overloading and overheating

• Dual Wheel Kits – Prevent scalping by keeping blades elevated

Whether you're maintaining a pasture, clearing trails, or managing overgrown fields, the Ground Shark™ SD Brush Cutter delivers dependable performance for everyday brush-cutting tasks.

MULCHPOWER™ PRESSURE GAUGE (OPTIONAL)

Paladin MulchPower™ Technology provides live, dynamic power and loading feedback to the operator through a unique pressure monitoring gauge.  With MulchPower™ operators can see when the tool is fully charged and also when it is nearing a state of being overloaded, so that operating technique can be adjusted to maximize performance. 

• RUN AT PEAK POWER: Greater starting power improves cutting efficiency  and tool life, increasing overall job productivity and decreasing total   operating costs.
• AVOID STALLING: Greater starting power dramatically reduces the likelihood  of stalling.
• WORK WITH CONFIDENCE: Conditions change from job to job. MulchPower™  lets you be more aggressive when the job will allow it, letting you maximize  your production.
• GREEN - Optimal Operating Pressure
• YELLOW - Approaching Attachment Stall Pressure
• RED - Attachment Stalled/Not Recommended Operating Pressure

SPECS

MODEL GS60SD GS72SD(A) GS72SD(B) GS72SD(C) GS78SD(A) GS78SD(B) GS78SD(C) ORDER CODE 30360A-0022 30372A-0022* 30372B-0022* 30372C-0022* 30378A-0022* 30378B-0022* 30378C-0022* COUPLER SIZE 1/2 IN 1/2 IN 1/2 IN 1/2 IN 1/2 IN 1/2 IN 1/2 IN OVERALL HEIGHT 24 IN 24 IN 24 IN 27 IN. 24 IN 24 IN 27 IN. OVERALL WIDTH 64 IN 76 IN 76 IN 76 IN 82 IN 82 IN 82 IN OVERALL LENGTH 76 IN 88 IN 88 IN 88 IN 9 IN 94 IN 94 IN CUTTING WIDTH 60 IN 72 IN. 72 IN. 72 IN. 78 IN 78 IN 78 IN MINIMUM CUTTING HEIGHT 2 IN 2 IN 2 IN 2 IN 2 IN 2 IN 2 IN CUTTING CAPACITY 4 IN 4 IN 4 IN 4 IN 4 IN 4 IN 4 IN DECK THICKNESS .25 IN .25 IN .25 IN .25 IN .25 IN .25 IN .25 IN RECOMMENDED FLOW 15-25 GPM 15-25 GPM 26-32 GPM 33-40 GPM 15-25 GPM 26-32 GPM 33-40 GPM REQUIRED LIFT CAPACITY 1200 LBS 1400 LBS 1400 LBS 1500 LBS 1500 LBS 1500 LBS 1600 LBS WEIGHT 1120 LBS 1280 LBS 1280 LBS 1320 LBS 1360 LBS 1365 LBS 1405 LBS

 

 FAMILY MODEL

CUT

WIDTH

CUT

DIA.

CUT MIN.

LBS.

GPM FLOW

MOTOR

BI-DIRECTIONAL

STD DUTY GS60SD

60

4

2

1120

15-25

GEROTOR

YES

STD DUTY GS72SD(A)

72

4

2

1280

15-25

GEROTOR

YES

STD DUTY GS72SD(B)

72

4

2

1280

26-32

GEROTOR

YES

STD DUTY GS72SD(C)

72

4

2

1320

33-40

GEROTOR

YES

STD DUTY GS78SD(A)

78

4

2

1365

15-25

GEROTOR

YES

STD DUTY GS78SD(B)

78

4

2

1365

26-32

GEROTOR

YES

STD DUTY GS78SD(C)

78

4

2

1405

33-40

GEROTOR

YES

 

BIG DAVE

The SD cutter is for general grounds maintenance. This cutter has a gear type motor and can handle up to 4" material.