Skip to main content

Osborn 0007574900 Wheel Brush 5/8 in Crimped Carbon Steel

Sold by Voomi Supply

Osborn 0007574900 Wheel Brush 5/8 in Crimped Carbon Steel
$14.99

Opens voomisupply.com in a new tab. The seller handles checkout, shipping, and returns.

We may earn a commission when you buy through product links. Sponsored labels identify paid placements from Shopify. We select the Weekly Edit independently. How we make money

Price and availability requested live for this page. Final details are set by the seller.

Share

A closer fit

Find this, but…

Start with this listing, then change what matters. Matches come live from independent Shopify shops and are separate from StorkScout’s Weekly Edit.

Searches start with new, available products that ship to and from the U.S.

What would suit you better?

Try “folds for air travel” or “same shape, without plastic.”

About this product

Product Description

The OSBORN 0007574900 is a small-diameter wheel brush designed for deburring, cleaning, and surface preparation on metal, pipe fittings, and other workpieces. It uses crimped carbon steel wire fill, which flexes under load to maintain consistent contact across irregular surfaces. The 5/8-inch outside diameter and 1/8-inch shank make it well suited for use in rotary tools, die grinders, and drill presses. It is rated to 25,000 RPM, allowing high-speed operation in tight access areas. The shank is included, so no separate adapter is required. Trades working with copper, steel, or galvanized fittings commonly use this style of brush for surface prep and joint cleaning.

This wheel brush fits typical applications in plumbing, HVAC, electrical, and general metalworking where a small-profile abrasive brush is needed. It is appropriate for cleaning burrs from cut pipe ends, removing scale or oxidation from fittings, and prepping surfaces before soldering or brazing. The compact 5/8-inch diameter allows access to recessed areas and tight bore openings that larger brushes cannot reach. Installation or use requires only a compatible rotary tool or die grinder with a collet or chuck accepting a 1/8-inch shank.

Key Features

  • Crimped carbon steel wire fill for flexible, consistent contact on irregular surfaces
  • 5/8-inch outside diameter sized for tight-access deburring and surface prep
  • 1/8-inch shank diameter compatible with standard rotary tool and die grinder collets
  • 25,000 RPM maximum speed rating for high-speed operation
  • Shank included — no separate adapter required

Compatibility

Designed as a shank-mount wheel brush for use in rotary tools, die grinders, and drill presses accepting a 1/8-inch shank diameter.

Installation Notes

This brush is installed by a technician or tradesperson into any rotary tool or die grinder with a collet or chuck sized for a 1/8-inch shank. Confirm the tool is rated to at least 25,000 RPM before use, and never exceed the brush maximum RPM rating. Disconnect or power down the tool completely before installing or removing the brush. Always wear appropriate eye protection when operating wire wheel brushes at high speed.

Technical Specifications

  • Outside Diameter: 0.625 inches
  • Shank Diameter: 0.125 inches
  • Wire Type: Crimped
  • Fill Material: Carbon Steel
  • Filament Wire Diameter: Up to 0.0099 inches
  • Maximum RPM: 25,000
  • Mount Type: Shank
  • Shank Included: Yes
  • Weight: 0.37 pounds

Standard Information

  • Brand: OSBORN
  • Manufacturer Part Number: 0007574900

Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.