About this product
Product Description
The OSBORN 0003213400 is a crimped wire cup brush designed for aggressive surface preparation on metal, welds, and castings. Built with a 4-inch diameter and steel fill wire at 0.02 inches in diameter, this brush delivers consistent wire action across the contact face. The 5/8-11 threaded arbor hole mounts directly to standard angle grinders and bench grinders used in fabrication, HVAC ductwork prep, pipe fitting, and structural steel work. A 1-1/8-inch trim length provides the wire flex needed for blending and cleaning without gouging base material. Rated to 9,000 RPM, this brush suits most standard grinder speeds in trade and industrial applications.
This cup brush is well-suited for use in plumbing, HVAC, electrical, and general metal fabrication where surface prep is required before welding, brazing, soldering, or coating. Typical applications include removing mill scale, rust, paint, and weld spatter from pipe, sheet metal, and structural components. The crimped wire configuration is preferred when the work surface requires a moderate, consistent scratch pattern rather than the aggressive cut of a knotted wire brush. Tradespeople using angle grinders for pre-weld cleanup or post-weld dressing will find this brush fits standard tool setups without adapters.
Key Features
- 4-inch brush diameter for broad surface contact on flat and curved workpieces
- Crimped steel wire fill provides consistent, controlled abrasion
- 0.02-inch wire diameter balances aggressiveness with wire longevity
- 5/8-11 threaded arbor hole fits standard angle grinders and bench grinders without adapters
- 1-1/8-inch trim length allows wire flex for surface blending and contour work
- 9,000 RPM maximum speed rating suitable for most standard grinder applications
Compatibility
Designed for use with angle grinders and bench grinders equipped with a 5/8-11 threaded spindle, which is the standard arbor size on most 4-inch and 4.5-inch angle grinders used in trade work.
Installation Notes
Installation and use of wire cup brushes should be performed by qualified tradespeople familiar with abrasive wheel safety. Always power down and unplug or de-energize the grinder before mounting or removing the brush. Confirm the tool spindle speed does not exceed the 9,000 RPM maximum rating of the brush before operation. Wear appropriate PPE including face shield, eye protection, and gloves, as wire tips and debris are ejected during use.
Technical Specifications
- Brush Diameter: 4 inches
- Wire Diameter: 0.02 inches
- Brush Type: Crimped
- Fill Material: Steel
- Arbor Type: Threaded Arbor
- Arbor Hole Thread Size: 5/8-11
- Trim Length: 1-1/8 inches
- Maximum RPM: 9,000
- Weight: 1.25 pounds
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0003213400
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






