About this product
Product Description
The OSBORN 0003075400 is a stainless steel end brush designed for surface preparation, deburring, cleaning, and finishing work on metal, welds, and hard-to-reach recessed areas. The brush measures 0.5 inches in diameter with a 0.125-inch pilot diameter for secure chuck mounting. Wire diameter runs up to 0.010 inches, providing a balance of flexibility and aggressive cleaning action. Rated to 25,000 RPM, it is suited for use with high-speed rotary tools, die grinders, and flex-shaft machines. It is not bridled, encapsulated, or flared. Licensed tradespeople and metalworkers use this brush for weld cleanup, port finishing, and surface conditioning on parts where a standard wheel or cup brush cannot reach.
This end brush is commonly used in fabrication shops, maintenance facilities, and manufacturing environments. It fits standard 0.125-inch collet or chuck setups found on die grinders and rotary tools. Typical applications include deburring drilled holes, cleaning weld joints in tubing or pipe, and surface prep inside recessed bores or cavities. The stainless steel fill material makes it appropriate for work on stainless steel workpieces where carbon steel wire contamination is a concern.
Key Features
- 0.5-inch brush diameter for targeted contact in tight areas
- Stainless steel fill material — no carbon steel contamination on stainless workpieces
- Wire diameter up to 0.010 inches for flexible, controlled abrasion
- 25,000 RPM maximum speed rating — compatible with high-speed die grinders and rotary tools
- 0.125-inch pilot diameter fits standard collet and chuck setups
- Not bridled, encapsulated, or flared — open-face construction for maximum wire contact
Compatibility
Designed for use with die grinders, rotary tools, and flex-shaft machines equipped with a 0.125-inch collet or chuck. Verify that the tool's rated no-load RPM does not exceed 25,000 RPM before mounting.
Installation Notes
Installation and operation should be performed by personnel familiar with rotary abrasive tool safety. Always confirm the tool's maximum no-load speed does not exceed the brush's 25,000 RPM rating before use. Wear appropriate eye protection and face shielding per ANSI B7.1 guidelines when operating wire brushes. Inspect the brush for damaged or flared wire before each use and remove from service if deformation is observed.
Technical Specifications
- Brush Diameter: 0.5 inches
- Pilot Diameter: 0.125 inches
- Wire Diameter: Up to 0.010 inches
- Fill Material: Stainless Steel
- Maximum RPM: 25,000
- Piloted: Yes
- Bridled: No
- Encapsulated: No
- Flared: No
- Weight: 0.504 pounds
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0003075400
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






