About this product
Product Description
The OSBORN 0002241600 is a 10-inch diameter crimped wheel brush designed for surface conditioning, deburring, and finishing applications. It uses nylon fill material loaded with 80-grit silicon carbide abrasive, delivering consistent scratch patterns and controlled material removal without the aggressive bite of wire fill. The brush mounts via a 2-inch arbor hole and runs at a maximum rated speed of 3,600 RPM. With a 1-inch face width and a 2-1/16-inch trim length, it provides a defined contact zone suited to flat and contoured workpiece surfaces. Machinists, fabricators, and maintenance technicians working with automated or bench-mounted spindle equipment will find this brush well-suited to repetitive finishing passes.
This wheel brush is used in industrial and maintenance shop environments where controlled abrasive action is needed on metal, composite, or plastic workpieces. Typical applications include edge blending, light deburring, surface prep before coating, and scale removal on fabricated parts. The nylon-plus-silicon-carbide construction makes it appropriate for materials where a steel wire brush would cause contamination or excessive surface damage. It fits standard arbor-mount bench grinders and spindle-driven brush stations configured for a 2-inch arbor bore.
Key Features
- 10-inch outside diameter with a 1-inch face width for a defined contact zone
- Crimped nylon fill with 80-grit silicon carbide abrasive for controlled surface conditioning
- 2-inch arbor hole mount — no shank included, fits standard spindle equipment
- Rated to 3,600 RPM maximum operating speed
- 2-1/16-inch trim length provides consistent flex and abrasive contact
- Non-encapsulated construction for straightforward inspection and replacement
Compatibility
Designed for use on arbor-mount bench grinders and power brush stations accepting a 2-inch arbor bore. Verify spindle speed does not exceed the 3,600 RPM maximum rating before installation.
Installation Notes
Installation should be performed by a qualified machinist or maintenance technician familiar with rotating brush equipment. Power down and lock out the spindle drive before mounting or removing the brush. Confirm the machine arbor diameter matches the 2-inch hole size and that the operating spindle speed does not exceed 3,600 RPM. Always install appropriate workpiece guards and wear eye protection before resuming operation.
Technical Specifications
- Outside Diameter: 10 inches
- Face Width: 1 inch
- Arbor Hole Size: 2 inches
- Trim Length: 2-1/16 inches
- Fill Material: Nylon
- Abrasive Material: Silicon Carbide
- Grit: 80
- Wire Type: Crimped
- Mount Type: Arbor Hole
- Maximum RPM: 3,600 RPM
- Shank Included: No
- Encapsulated: No
- Weight: 6 pounds
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0002241600
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
