About this product
Product Description
The OSBORN 0002231400 is a 10-inch diameter wheel brush designed for surface finishing, deburring, and blending applications. It uses crimped nylon filaments impregnated with 180-grit silicon carbide abrasive, which classifies it as a fine-grade tool. The brush mounts via a 2-inch arbor hole with a two-keyway style, making it compatible with standard arbor-driven bench or pedestal grinders. Rated to 3,600 RPM, the brush delivers consistent abrasive action across flat and contoured workpiece surfaces. With a face width of 1 inch and a trim length of approximately 2-1/16 inches, it provides a well-defined contact zone for controlled stock removal or finishing passes.
This wheel brush is suited for metalworking, fabrication, and maintenance environments where light deburring, surface conditioning, or scale removal is required. It is commonly used by machinists, maintenance technicians, and fabricators working on ferrous and non-ferrous metals. The nylon-encapsulated silicon carbide construction allows the abrasive to self-dress as the filaments flex, maintaining a consistent cut rate throughout the brush life. No shank is included; the brush mounts directly to an arbor spindle. At 8.4 pounds, it is sized for stationary machine use rather than portable tool applications.
Key Features
- 10-inch outside diameter with a 1-inch face width for a defined finishing contact zone
- Crimped nylon filaments filled with 180-grit silicon carbide abrasive for fine surface conditioning
- 2-inch arbor hole with two-keyway style for secure, centered mounting on standard arbor spindles
- 3,600 RPM maximum operating speed rated for stationary bench or pedestal grinder use
- Trim length of 2-1/16 inches provides filament flex for contour-following action
- No encapsulation — open construction allows debris clearance during operation
Compatibility
Designed for use with stationary bench grinders and pedestal grinders equipped with a 2-inch arbor hole spindle accepting a two-keyway mount configuration. No specific OEM model compatibility was provided in the product data.
Installation Notes
Installation should be performed by a qualified machinist or maintenance technician familiar with rotating abrasive tooling. Power down and lock out the grinder before mounting or removing the wheel brush. Verify that the machine spindle speed does not exceed the 3,600 RPM maximum rated speed of the brush before operation. Inspect the brush for damaged or splayed filaments before each use, and ensure all arbor hardware is properly torqued per the grinder manufacturer specifications.
Technical Specifications
- Outside Diameter: 10 inches
- Face Width: 1 inch
- Arbor Hole Size: 2 inches
- Arbor Hole Style: Two Keyway
- Mount Type: Arbor Hole
- Wire Type: Crimped
- Fill Material: Nylon
- Abrasive Material: Silicon Carbide
- Grit: 180
- Grade: Fine
- Trim Length: 2-1/16 inches
- Maximum RPM: 3,600
- Encapsulated: No
- Shank Included: No
- Weight: 8.4 pounds
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0002231400
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
