About this product
Product Description
The OSBORN 0002110600 is a crimped wire wheel brush designed for aggressive surface preparation, deburring, and cleaning on metal and other hard surfaces. Built with stainless steel fill material, this brush resists corrosion and is well suited for use on stainless steel workpieces where carbon steel wire contamination is not acceptable. The wheel mounts via a 1-1/4 inch arbor hole and runs at a maximum speed of 4,500 RPM. With a face width of 3/4 inch and a trim length of 1-1/2 inches, it delivers consistent contact across the work surface. Weighing 1.625 pounds, this brush is used in industrial and fabrication shop settings by machinists, welders, pipefitters, and metalworkers.
This wheel brush is appropriate for bench grinder and arbor-mounted applications in fabrication, welding prep, rust removal, and scale removal operations. The crimped wire construction provides a more flexible, moderate-aggression action compared to knotted wire, making it suitable for cleaning and blending without excessive material removal. It is commonly used on ferrous and non-ferrous metals where surface cleanliness is critical before welding, coating, or inspection.
Key Features
- 8 inch outside diameter for broad surface coverage on bench-mounted grinders
- Crimped stainless steel wire fill resists corrosion and prevents workpiece contamination
- 1-1/4 inch arbor hole for standard bench grinder and arbor press mounting
- 4,500 RPM maximum speed rating for safe high-speed operation
- 3/4 inch face width and 1-1/2 inch trim length provide consistent, even contact
- No shank included — arbor hole mount only
Compatibility
Designed for use with bench grinders and arbor-mounted spindles accepting a 1-1/4 inch arbor hole. Verify that the host machine does not exceed the 4,500 RPM maximum rated speed of this brush before installation.
Installation Notes
Installation should be performed by a qualified operator familiar with abrasive wheel and wire brush safety standards, including ANSI B165.1 guidelines. Always power down and lock out the bench grinder before mounting or removing the brush. Confirm the spindle arbor size matches the 1-1/4 inch hole and that the machine RPM does not exceed the brush maximum rating of 4,500 RPM. Wear appropriate eye protection and a face shield during operation, as wire bristles can shed under load.
Technical Specifications
- Outside Diameter: 8 inches
- Face Width: 0.75 inches
- Arbor Hole Size: 1-1/4 inches
- Trim Length: 1-1/2 inches
- Maximum RPM: 4,500
- Wire Type: Crimped
- Fill Material: Stainless Steel
- Filament Wire Diameter Range: 0.0100 - 0.0199 inches
- Mount Type: Arbor Hole
- Shank Included: No
- Encapsulated: No
- Weight: 1.625 pounds
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0002110600
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






