About this product
Product Description
The OSBORN 0001144300 is a 3-inch diameter crimped wheel brush designed for surface conditioning, deburring, and cleaning applications in metalworking and fabrication environments. It features carbon steel fill wire in the 0.0100 to 0.0199 inch diameter range, mounted on a 1/4-inch shank for use in standard die grinders and rotary tools. The brush is rated to 25,000 RPM, making it suitable for high-speed power tool applications. A 7/16-inch face width and 3/4-inch trim length provide the wire geometry needed for consistent contact on edges, welds, and irregular surfaces. The shank is included. Installation is handled by machinists, fabricators, and maintenance technicians.
This wheel brush is suited for light to medium material removal, rust and scale removal, weld spatter cleanup, and surface prep on ferrous metals. The crimped wire construction absorbs vibration and provides a more flexible action compared to knotted wire, making it appropriate for contoured or irregular workpieces. It is commonly used in fabrication shops, maintenance facilities, and light industrial settings where a die grinder or rotary tool is the primary driver.
Key Features
- 3-inch outside diameter with 7/16-inch face width for targeted surface contact
- Crimped carbon steel wire in the 0.0100 to 0.0199 inch diameter range
- 25,000 RPM maximum speed rating for use with high-speed die grinders
- 1/4-inch shank diameter included — no separate arbor required
- 3/4-inch trim length provides flexible wire action on contoured surfaces
- Non-encapsulated construction for full wire contact across the face
Compatibility
Designed for use with die grinders and rotary tools accepting a 1/4-inch shank. Suitable for use on ferrous metals including carbon steel and cast iron surfaces.
Installation Notes
Always verify that the tool's rated RPM meets or exceeds the brush's 25,000 RPM maximum before mounting. Wear appropriate eye protection and a face shield during operation, as wire bristles can shed under load. Inspect the brush for damaged or loose wires before each use and do not operate a brush showing signs of wire fatigue. Follow ANSI B165.1 safety standards for power wire brush use.
Technical Specifications
- Outside Diameter: 3 inches
- Face Width: 7/16 inches
- Trim Length: 3/4 inches
- Shank Diameter: 1/4 inch (0.2500 inches)
- Fill Material: Carbon Steel
- Wire Type: Crimped
- Filament Wire Diameter Range: 0.0100 to 0.0199 inches
- Maximum RPM: 25,000
- Mount Type: Shank
- Shank Included: Yes
- Encapsulated: No
- Weight: 2.13 pounds
Standard Information
- Brand: OSBORN
- Manufacturer Part Number: 0001144300
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






