About this product
The Plates That Let Your Orbot Micro Run Pads
Your Orbot Micro needs these driver plates to run pads. They thread onto the two heads in place of brushes. The hook face grips AkwaStrip pads, and SuperZorb pads stretch over the plate with their elastic ring.
They're also a wear part. Orbot says the Velcro face generally needs replacing after about 200 hours of use, which is when pads start to slip. Keep a spare pair in the truck and a worn plate never ends a job early.
Why You'll Love These Driver Plates
Quick pad changes: press a pad on, pull it off, and you're back to work in seconds.
Made for the Micro, sized for its 4 in heads and threaded for its counterweights.
About 200 hours of Velcro life per plate, according to Orbot, before the hook face needs replacing.
Sold as a pair, one plate per head.
How to Fit the Driver Plates
Unplug your Micro and lay it head-up. Hold the counterweight nut with a flat wrench and thread each plate on clockwise, hand tight only. When fitting SuperZorb pads, center each pad and stretch the elastic ring over the plate, then turn the heads by hand to check the two pads don't touch.
Would a brush suit the job better? See the four Orbot Micro brush grades.
Driver Plate Specifications
Brand Orbot Fits Orbot Micro stair and upholstery tool (HOSOM) Quantity 2 plates, one per head Face Velcro hook face Service Life About 200+ hours before the Velcro needs replacing (per Orbot) Works With Orbot Micro SuperZorb pads and AkwaStrip pads Part Number HOSOMSZDPQuestions? Call (855) 601-5678 or email support@oneupcleaning.com.
Description supplied by OneUp Cleaning through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
