About this product
Product Description
The OATEY K83016BX is a universal toilet tank repair kit that addresses the most common toilet malfunctions in a single package. It includes a fill valve, a flush valve with flapper, and a complete tank-to-bowl assembly with hardware. The fill valve adjusts from 9.5 inches to 13.5 inches in height and features a push-button water level adjustment and a locking ring for secure height setting. The flush valve adjusts from 7.5 inches to 11.5 inches and includes a no-cut overflow tube and a timing-cone flapper that can be twisted between high-performance and water-conserving modes. This kit is suited for plumbers and experienced DIYers servicing residential toilets.
This kit is designed for standard residential toilet tanks and covers four of the most frequently reported toilet problems: constant running, slow tank refill, tank leaks, and noise during the fill cycle. The complete tank-to-bowl assembly accommodates both 2-bolt and 3-bolt toilet configurations and includes bolts, nuts, washers, and a sponge gasket. The refill tube is included with the fill valve. The timing-cone flapper allows the installer to tune flush performance or water conservation on-site without additional parts.
Key Features
- Fill valve adjusts from 9.5 inches to 13.5 inches with push-button water level control and locking height ring
- Flush valve adjusts from 7.5 inches to 11.5 inches with a no-cut overflow tube
- Timing-cone flapper twists between high-performance and water-conserving flush settings
- Tank-to-bowl assembly fits 2-bolt and 3-bolt toilets; includes bolts, nuts, washers, and sponge gasket
- Fill valve seal is long-lasting and wipe-clean, requiring no replacement parts
- Refill tube and chain with hook included for complete installation
Compatibility
Designed as a universal replacement for standard residential toilet tank components; both the fill valve and flush valve are stated to fit most standard toilets.
Installation Notes
Shut off the water supply at the angle stop valve and flush the tank fully before beginning any toilet tank service. A plumber or qualified installer should follow local plumbing code requirements, which typically reference the IPC or applicable state plumbing code. Remove all standing water from the tank before disconnecting the fill valve or tank-to-bowl hardware. Verify the finished height of both valves within the tank before tightening locking rings and securing the tank-to-bowl assembly.
Technical Specifications
- Fill Valve Height Range: 9.5 inches to 13.5 inches
- Flush Valve Height Range: 7.5 inches to 11.5 inches
- Tank-to-Bowl Bolt Configurations: 2-bolt and 3-bolt
- Package Length: 6.85 inches
- Package Width: 12.95 inches
- Package Height: 3.6 inches
- Weight: 1.46 pounds
Standard Information
- Brand: OATEY
- Manufacturer Part Number: K83016BX
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






