About this product
Black/Gold Neutrik NC4MXX-B male four-pin XLR cable connector
Black/Gold Neutrik NC4MXX-B combines a Black chromium-plated metal housing with gold-plated contacts. This XX-Series male four-pin XLR cable-end connector uses solder contacts and chuck-type strain relief for custom cable assembly. It is a connector component, not a finished cable or panel-mount receptacle.
Other single-connector finishes: Black/Silver NC4MXX-BAG and Nickel/Silver NC4MXX.
Check mating connector, pinout and cable fit
This is a four-pin XLR, not a standard three-pin microphone connector. Confirm that the equipment requires a mating female four-pin XLR and verify every pin assignment. Matching pin count and physical fit do not establish electrical compatibility.
Fits cable jackets from 3.5 to 8.0 mm outside diameter. The listed maximum wire size is 1.5 mm² / 16 AWG. Check actual conductor construction, contact fit and strain-relief grip before assembly.
For powered connections, verify polarity and the complete system's voltage/current requirements before wiring. Connector ratings do not establish the current capacity of the cable or equipment. Disconnect power before assembly or testing and follow the equipment manufacturer's connection instructions.
Assembly guidance
Fit the boot and housing parts onto the cable before soldering. Follow Neutrik's preparation and assembly instructions, identify pins from the correct viewing side, and prevent solder bridges or loose strands. Secure the chuck to the cable jacket, not the individual wires. Test continuity, shorts and any required polarity before connecting equipment.
Features
- Black housing and gold-plated contacts.
- Male four-pin XX-Series cable-end design.
- Solder contacts.
- Improved locking recess without a window.
- Chuck-type strain relief.
- Boot with polyurethane gland to help manage cable bending stress.
- Rugged zinc diecast shell with protected internal thread.
- Optional colored rings and boots for identification.
Electrical specifications
- Capacitance between contacts: ≤7 pF.
- Contact resistance: ≤3 mΩ.
- Dielectric strength: 1.5 kV DC; not an operating-voltage rating.
- Initial insulation resistance: >2 GΩ.
- Rated current: 10 A per contact.
- Rated voltage: 50 V.
Mechanical and material specifications
- Model: NC4MXX-B.
- Cable outside diameter: 3.5–8.0 mm.
- Maximum wire size: 1.5 mm² / 16 AWG.
- Insertion and withdrawal force: ≤20 N each.
- Listed lifetime: >1,000 mating cycles.
- Wiring: Solder contacts.
- Locking: Latch-lock mating system.
- Contacts: Brass, gold-plated.
- Shell and locking element: Zinc diecast.
- Shell plating: Black chromium.
- Boot: Polyurethane.
- Bushing: Polyamide PA6, 15% glass reinforced.
- Insert: Polyamide PA6.6, 30% glass reinforced.
- Strain relief: Polyacetal, POM.
Environmental specifications
- Protection class: IP40; not a weatherproof rating.
- Flammability: UL94 HB.
- Standard compliance: IEC 61076-2-103.
- Solderability: IEC 68-2-20.
- Temperature range: −30°C to +80°C.
Description supplied by Performance Audio through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
