About this product
Description
It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013+ Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST's performance potential.
Mishimoto has replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26% better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21% increase in flow to and from the intercooler.
The piping isn't the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST's intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP.
The Mishimoto Performance Intercooler Kit for your 2013+ is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.
Features
4.3-in thick intercooler design optimized for maximum flow.
8 HP and 10 lb.-ft. of torque gains when combined with other Mishimoto Focus ST parts.
Optimal core design for maximum cooling efficiency with minimal pressure drop.
Specs
Overall width (in) 7.25 Inlet (in) 2.5 Outlet (in) 2.5 Weight (lbs) 30 Includes (1) Mishimoto Intercooler; (1) Aluminum Intercooler Pipe; (2) Silicone couplers; (1) Silicone Pipe; (6) High torque Worm Gear clamps CARB EO number D-759-6 Cold side pipe inside diameter 2.5 in End tank construction Cast Hose clamps included Yes Intercooler type Air-to-Air Pipe finish Powder Coated Universal or specific fit Specific Chassis codes C346 Overall length (in) 35.7 Overall height (in) 8.3 Part number MMINT-FOST-13KBBKDescription supplied by Raptor Racing through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
