About this product
Minwax Wood Finish Water-Based Solid Color Stain opens up a world of possibilities in just one wood-grain-hiding coat. Ideal for small projects, unfinished furniture, cabinets, doors and trim. For interior use only.
Finish every project with a clear protective topcoat like crystal-clear Minwax Polycrylic or warmly ambering Minwax fast-dry polyurethane. For truest color, use Minwax Polycrylic over light and cool colors, fast-dry polyurethane over warm wood tones.
Apply stain with a synthetic bristle brush, foam brush, staining pad or rag. Allow stain to penetrate no longer than 3 minutes. Remove stain that has not penetrated the wood with a clean cloth. Wipe in the direction of the grain using light to medium pressure to achieve even stain color.
Note: for best results, do not allow cloth to become saturated with stain. Replace with a clean cloth as necessary. Do not allow stain that has not penetrated the wood to dry on the wood surface.
Note: any uneven color penetration can be blended. Rewet the surface with more stain and lightly rub the stain into the surface, blending light and dark areas. To darken color, apply a second coat after 2 hours repeating directions for application of first coat. Do not sand between coats.
- Transparency: Solid
- Base Type: Water-Based
- Product Type: Wood Stain
- Container Size: 1 qt
- Tintable: No
- Application Method: Synthetic Brush
- Time Before Recoating: 2 hr
- VOC Level: 189.03 g/L
- Coverage Area: 100 sq ft
- UV Resistant: No
- Sealer: No
- Indoor or Outdoor: Indoor
- Cleanup: Water
- Dry Time: 2 - 3 hr.
Minwax Wood Finish Water-Based Solid Color Stain Product Data Sheet
Description supplied by ThePaintStore.com through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






