About this product
Product Description
The MIDLAND INDUSTRIES BLAY-400-CASS is a 4-inch nominal water discharge lay flat hose assembly built for high-volume liquid transfer applications. The hose features a PVC tube and PVC cover reinforced with woven high-tensile synthetic yarn, giving it durability under pressure while remaining flexible enough to lay flat during storage and handling. C/E camlock fittings are installed at both ends for fast, tool-free connection to discharge ports and receiving equipment. The assembly spans 50 feet and weighs approximately 29.49 pounds. It is rated for temperatures from 15 degrees F to 130 degrees F, making it suitable for a wide range of seasonal field conditions. This product is installed by plumbers, water management crews, contractors, and pump service technicians.
The BLAY-400-CASS is designed for water discharge service in dewatering, bypass pumping, construction site drainage, and general fluid transfer operations. The 4-inch nominal diameter accommodates high flow rates typical of centrifugal trash pumps and submersible dewatering pumps. The camlock C/E configuration allows fast connection to standard pump discharge ports without threaded assembly. The blue color aids visual identification of water discharge lines on job sites where multiple hose types are in use.
Key Features
- 4-inch nominal bore supports high-volume water discharge flow rates
- 50-foot length with C/E camlock fittings at both ends for tool-free connections
- PVC tube and PVC cover with woven high-tensile synthetic yarn reinforcement
- Operating temperature range: 15 degrees F to 130 degrees F
- Lay flat design for compact coiling, storage, and transport
- Blue color for easy identification of discharge lines on multi-hose job sites
Compatibility
Designed for use with standard 4-inch C/E camlock pump discharge ports on centrifugal, submersible, and trash pumps used in water discharge and dewatering service.
Installation Notes
Installation of lay flat hose assemblies is typically performed by pump technicians, plumbers, or site contractors. Before connecting, confirm the pump is powered off and isolated. Inspect camlock arms and gaskets for wear or damage prior to each use and replace worn components before pressurizing the line. Lay the hose out straight without kinks before operating the pump to avoid flow restriction and premature wear at fold points.
Technical Specifications
- Hose Type: Water Discharge Lay Flat
- Nominal Diameter: 4 inches
- Length: 50 feet
- Connection Type: C/E Camlock
- Tube Material: PVC
- Cover Material: PVC
- Reinforcement: Woven High-Tensile Synthetic Yarn
- Hose Color: Blue
- Maximum Temperature: 130 degrees F
- Minimum Temperature: 15 degrees F
- Weight: 29.49 pounds
Standard Information
- Brand: MIDLAND INDUSTRIES
- Manufacturer Part Number: BLAY-400-CASS
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






