About this product
SELF-LEVELING FLOOR UNDERLAYMENT
LEVEL EZ™
The time-saving self-leveler.
- Minimal subfloor preparation
- Highly flowable for smoothing out floors
- Install from featheredge to 2" (0 mm to 51 mm)
- Can be walked on in as little as 2 hours
Application
Multifamily wood frame, light commercial wood frame and commercial pre-cast, and poured-in-
place and pre-stressed concrete construction and renovation.
Subfloor
Interior gypsum, concrete, wood.
Technical Data
Installation Depths
From featheredge to 2 in. (0 – 51 mm).
For deeper pours, contact Maxxon Corporation. Compressive Strength Minimum 5,000 psi (34.5 MPa) Flexural Strength 1,000 psi (6.9 MPa) when dry (ASTM C348) Dry Density 115-125 lbs/ft³ (1842-2002 kg/m³) Packaging 50 lb bag Work Time 15–20 min Storage Temperature 50 - 100 °F (10 - 38 °C) Coverage 21-22 ft² at 1/4 in. Installation Temperature Above 50 ˚F (10 ˚C) for at least 24 hours prior to installation Trade Traffic 24 hours after installation Fire Performance (ASTM E84) Flame Spread – 0
Fuel Contribution – 0
Smoke Development – 0
For deeper pours, contact Maxxon Corporation. Compressive Strength Minimum 5,000 psi (34.5 MPa) Flexural Strength 1,000 psi (6.9 MPa) when dry (ASTM C348) Dry Density 115-125 lbs/ft³ (1842-2002 kg/m³) Packaging 50 lb bag Work Time 15–20 min Storage Temperature 50 - 100 °F (10 - 38 °C) Coverage 21-22 ft² at 1/4 in. Installation Temperature Above 50 ˚F (10 ˚C) for at least 24 hours prior to installation Trade Traffic 24 hours after installation Fire Performance (ASTM E84) Flame Spread – 0
Fuel Contribution – 0
Smoke Development – 0
Description supplied by mhowserinc.com through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.