About this product
🧼 5-IN-1 BOTTLE CLEANING DESIGN
From Bottle Walls
to the Small Details.
Five cleaning functions in one organized design: a soft cleaning face, side bristles, a separate straw brush, lid-detail bristles and a seal pick.
🍼 START WITH THE BOTTLE INTERIOR
Reach the Base.
Brush Along the Walls.
Guide the long brush through a suitable bottle opening to clean the inside. The rounded white cleaning face and pale side bristles give the head two distinct cleaning surfaces.
✋ A longer reach
The slender handle lets you guide the brush into the bottle without putting your hand inside.
🫧 A defined brush head
Use the head along the interior walls and base, choosing a bottle opening that fits.
🥤 SMALL TOOL. A DIFFERENT JOB.
For the Inside
of the Straw.
Use the separate yellow-handled wire brush for straw interiors. Its small bristled section passes through a suitable straw opening, helping you brush along the inside.
- Insert gently Guide the brush through the open end of a straw that fits.
- Brush along the inside Move it gently back and forth without forcing it.
- Rinse through Rinse the straw and brush after cleaning.
⭕ LOOK BENEATH REMOVABLE SEALS
Lift the Seal.
Reach the Groove.
Some cup lids have a removable gasket seated around the edge. The orange pick helps lift its edge so you can reach the ring and the groove underneath.
- Find the removable seal: check how your cup lid comes apart.
- Lift its edge gently: use the small pick to help release it.
- Clean and refit: wash the accessible parts and return the seal correctly.
Remove only parts designed to detach, following your cup manufacturer's care instructions.
🔍 GIVE THE LID A CLOSER CLEAN
Small Bristles.
Attention to the Edges.
Use the short detail bristles around accessible lid grooves and recessed edges. The compact tool is easier to position in these small areas than the main bottle-brush head.
〰️ Grooves & channels
Work the short bristles along the accessible contours of the lid.
🔎 Recessed edges
Give the smaller molded details their own part of the cleaning routine.
🌿 FINISH THE WASH. KEEP TOOLS TOGETHER.
Rinse and Dry.
Then Bring the Parts Together.
Rinse the tools and allow them to dry after cleaning. The main handle has an open storage slot for the removable lid-detail module. The long straw brush has its own small yellow handle.
- Rinse the tools Wash away remaining suds and loosened residue from each cleaning part.
- Allow them to dry Leave the cleaned parts to dry before storing.
- Return the detail module Fold the small details into their storage position and fit the module into the open end of the handle.
📋 GET TO KNOW YOUR CLEANING TOOLS
A Clear Look
at the Design.
Bottles, straws, lids, plants and kitchen furnishings shown are demonstration props.
＋ A FEW HELPFUL DETAILS
Before Your First Wash.
Choose bottle openings that fit the main brush head and straw openings that fit the slim brush. Guide the tools gently and avoid forcing them into narrow openings.
The detachable detail moduleThe removable lower module fits the open end of the main handle and carries the lid-cleaning details. The long straw brush is a separate tool with its own small yellow handle.
Manual operationThe brush and detail tools are operated by hand. No batteries or power connection are needed.
After-use careRinse the tools after use, allow them to dry and return the small components to their storage position. Follow your drinkware's care instructions when removing and refitting lid parts.
🧼 A LITTLE MORE CARE IN THE EVERYDAY
Five Cleaning Functions.
One Thoughtful Routine.
From the bottle walls to the straw and lid grooves, give each part a tool suited to the task. Then bring everything back together for the next wash.
Description supplied by thenuvaro through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
