About this product
Kunz Engineering AcrEase MR44BE 44" 23HP Rough Cut Pull-Behind Mower
Product Description
Top of the line 44″ rough cut model with a commercial grade twin cylinder electric start engine and electric clutch blade engagement. Works great behind an ATV for smaller acreage jobs or tight clearance conditions.
- 44″ Cutting Width
- 23 HP Briggs & Stratton Commercial Grade Twin Cylinder Engine
- Commercial Grade Deck Assembly
- 4 Tire Design
- Quick Single Crank Height Adjust System
- Height Adjustment Range From 2″ to 8″
- Electric Clutch Blade Engagement
- Conservative 2″ Diameter Sapling Rating
- Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle.
Features
- 23HP Briggs & Stratton Commercial Turf commercial grade twin cylinder engine
- The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 30mm (1-3/16") steel shafts, machined steel blade holders and large sealed ball bearings.
- The cutting height can quickly and easily be adjusted from 2"-8" with the single crank height adjustment system.
- The main deck is built out of 10 GA (.135") thick steel with a 3/16" thick steel top plate for reinforcement. An additional 1/4" thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just under 5/8" thick.
- Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.
- The blades are engaged with an electric clutch which is activated by simply pulling a switch. Electric clutches can extend the life of the belt and reduce overall belt maintenance
- The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.
- Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time
Specifications
- Class Mower: Rough Cut (Rear Discharge)
- Engine Make: OHV Briggs & Stratton Commercial
- Engine Model: Commercial Turf Twin Cylinder
- Engine HP: 23
- Lubrication Method: Pressure With Filter (Low Oil Pressure Shut-Off Included)
- Air Filter Type: Cyclonic Air Filtration System
- Electric Start (Battery not included): Yes
- Hour/Tach Meter: Optional
- Number of Mower Blades: 2-23″
- Blade Tip Speed (ft/min): 19000
- Cutting Width: 44″
- Cutting Height: 2.0 to 8.0 With Single Crank Assy
- Hitch: Directly Behind or Full Offset to Either Side
- Blade Engagement Clutch: Electric Clutch
- Deck Metal Thickness: 10 GA (.135″)
- Deck Top Plate Thickness: 3/16″ Backed With 1/4″ Plate at Blade Spindles
- (Blade Spindle Attachment Area)
- Weight: 530 lbs
- Pneumatic Fixed Rear Tires: 15/600×6, 4 Ply Tubeless (Flat Proof Option Available)
- Pneumatic Front Tires on Casters: 5.30/4.50×6, 4 Ply Tubeless (Flat Proof Option Available)
- Fuel Tank Size: 3 Gal.
- Blade Spindles
- Shaft Size: 30 mm (1-3/16″)
- Bearing #: 6206-2RST
- Drive Method: 1 B Section “V” Belt (Kevlar)
- Warranty: 1 Year Commercial
- Warranty – Engine: 3 Year Commercial
Product Documents
Description supplied by Prime Industrial USA through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
