KUBOTA SVL -2 REPLACEMENT SKID STEER DOOR | POLYCARBONATE | #V0621-34520

Kubota SVL Polycarbonate Replacement Door Panel

Replace broken front glass on select Kubota SVL compact track loaders with a clear polycarbonate panel machined around the original door pattern. This panel replaces Kubota glass number V0621-34520 for the models listed below and is offered in 1/4-inch and 1/2-inch thicknesses.

The edges and mounting locations are cut for the factory-style opening so the existing seal and door hardware can be transferred when they are serviceable. This listing is for the polycarbonate panel only. The frame, seal, handles, hinges, and mounting hardware are not included.

Fitment for This Listing

• Kubota SVL65-2C
• Kubota SVL75 and SVL75-2C
• Kubota SVL90-2C
• Kubota SVL95-2SC
• Kubota SVL97-2C

This page covers the earlier SVL application sold by SSC. For 2023-and-newer SVL -2 or -3 applications, review the Kubota SVL-3 polycarbonate listing instead. Model year alone is not enough when a machine has had a door or frame replacement, so confirm the model plate and current door configuration before checkout.

Choose 1/4 Inch or 1/2 Inch

Select the thickness that matches the work and the existing hardware arrangement. The 1/4-inch option is the closer replacement for a thinner factory panel. The 1/2-inch option adds material for brush clearing, mowing, mulching, forestry, and other debris-heavy work, but longer fasteners may be needed when replacing a thinner panel.

Polycarbonate handles impacts differently than tempered glass and weighs less, which makes it a common choice for machines working around branches, stones, and flying debris. It still needs routine cleaning with polycarbonate-safe products. Avoid dry wiping grit across the surface and do not use cleaners that are not approved for polycarbonate.

Installation Notes

Inspect the existing frame, seal, hinges, latches, and fasteners before disassembly. Reusing bent or worn hardware can make an otherwise correct panel difficult to align. Transfer the serviceable components, check the seal around the full perimeter, and cycle the door slowly to verify latch and cab clearance before returning the machine to work.

If the existing hardware is incomplete, damaged, or from an aftermarket door system, contact SSC before ordering. This panel is not a complete door assembly.

Common Questions

Does the panel include Kubota door hardware? No. This listing supplies the polycarbonate panel; the seal, frame, hinges, handles, latches, and fasteners are not included.

Which OEM glass number does it replace? The panel replaces V0621-34520 for the listed earlier SVL applications.

How do I choose the correct thickness? Check the current panel, hardware length, and job conditions. Contact SSC with machine and door photos if the existing setup is uncertain.