About this product
Kubota BX pallet forks are designed specifically for the lift capacity of Kubota BX tractors. Because these tractors have limited lift capacity, everything mounted in front of them needs to stay light while remaining durable enough for regular use.
The carriage is constructed entirely from 1/4″ A36 steel plate. The mounts are also 1/4″ plate, tied in with a torque tube at the top of the carriage to minimize the twisting effect inherent to the center rollback cylinder design. A tie-off point is cut into the side rail of the carriage to help secure loads on the forks or tie the tractor down on a trailer, along with an 8″ tall back stop integrated into the carriage.
About the Forks
Choose from 36″ or 42″ forks. Heavy duty 3/8″ fork rails resist bending. They're built to be durable and lightweight to match the lift capacity of the BX tractor line. The forks use a center-load design, so they can't slide off the end of the rail, and are adjustable in width along the rail.
Why Pallet Forks Instead of Clip-On Forks?
Pallet forks are a better option than clip-on bucket forks for moving palletized material or picking up logs. Clip-on forks tend to bend and distort the factory dirt bucket over time, and their lift capacity is limited because the bulk of the weight sits out in front of the bucket. This pallet fork attachment is designed to maximize the tractor's lift capacity by keeping weight as close to the loader pivot points as possible.
Specifications
- Mounting type: Pin on or quick attach
- Fork length: 36″ or 42″
- Carriage width: Pin on – 36″, quick attach – 45″
- Height: 24″
- Depth: 9″ without forks
- Weight: SSQA 36″ forks and carriage 177 lbs; SSQA 42″ forks and carriage 223 lbs; pin-on 36″ forks and carriage 162 lbs; pin-on 42″ forks and carriage 208 lbs
- Frame material: 1/4″ A36 plate
- Fork dimensions: 1.125″ x 3″ x 36″ or 42″
- Fork width: Adjustable
- Rated for up to 2,200 lb lift capacity (depending on loader model)
- Integrated tie-off point inside rail
- Compatible with Kubota BX6315 factory quick-tach
- Can be mounted directly to loader (no quick-tach required)
- Powder coated Kubota color finish
- Made in the USA
Compatible Models (call to verify)
- Kubota BX1880
- Kubota BX2380
- Kubota BX2680
- Kubota BX23S
- Kubota BX1500
- Kubota BX1800
- Kubota BX1830
- Kubota BX1850
- Kubota BX1860
- Kubota BX1870
- Kubota BX2200
- Kubota BX2230
- Kubota BX23
- Kubota BX2350
- Kubota BX2360
- Kubota BX2370
- Kubota BX24
- Kubota BX25
- Kubota BX25D
- Kubota BX2660
- Kubota BX2670
Contact us at (307) 417-6686 for help confirming fitment for your machine.
Description supplied by Farm Suppliez through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
