About this product
Product Description
The KRYLON K00859008 is a rust-preventive acrylic alkyd enamel spray paint formulated for direct-to-metal application. It delivers a flat, galvanizing gray finish without requiring a primer coat, making it a practical choice for HVAC techs, plumbers, electricians, and general maintenance professionals who need a fast, durable protective coating on exposed metal surfaces. The oil-based formula reaches a touch-dry state in approximately 30 minutes and a full handle-dry cure in about 1 hour. Each 15-ounce aerosol can covers 30 to 35 square feet per application. The Spray Any Way comfort tip allows the can to be held at multiple angles, which is useful when coating awkward or hard-to-reach components.
This coating is suited for use on metal, aluminum, and steel surfaces in both indoor and outdoor environments. Typical applications include repainting HVAC equipment housings, condenser cabinets, electrical enclosures, pipe hangers, brackets, structural steel, and other ferrous or non-ferrous metal components that need corrosion protection. It is appropriate for residential and light commercial maintenance work where a clean, uniform flat gray finish is required. Application temperature must stay between 55 and 75 degrees F for proper adhesion and cure.
Key Features
- Direct-to-metal formula — no primer required before application
- Touch dry in approximately 30 minutes; handle dry in approximately 1 hour
- Flat galvanizing gray finish blends with standard galvanized metal surfaces
- Spray Any Way comfort tip allows multi-angle application for tight spaces
- Covers 30 to 35 square feet per 15-ounce can
- Rated for both indoor and outdoor use
Compatibility
Designed for direct application on metal, aluminum, and steel surfaces. Suitable for use across HVAC, plumbing, electrical, and general industrial maintenance applications where a rust-preventive flat gray coating is needed.
Installation Notes
Surface preparation is critical for adhesion — clean the substrate of grease, rust scale, and loose paint before spraying. Shake the can thoroughly before use and maintain recommended application temperatures between 55 and 75 degrees F. Apply in a well-ventilated area and follow all aerosol safety guidelines, including keeping the can away from open flame or ignition sources. Allow adequate dry time before handling or reinstalling coated components.
Technical Specifications
- Product Type: Rust-Preventive Acrylic Alkyd Enamel
- Composition: Oil Based
- Color: Galvanizing Gray
- Color Family: Gray
- Finish: Flat
- Container Type: Aerosol Can
- Net Fill: 15 oz
- Coverage: 30 to 35 square feet per can
- Touch Dry Time: 30 minutes
- Handle Dry Time: 1 hour
- Direct To Metal: Yes
- Indoor/Outdoor: Indoor and Outdoor
- Minimum Application Temperature: 55 degrees F
- Maximum Application Temperature: 75 degrees F
- Package Weight: 1.24 pounds
- Package Quantity: 1
Standard Information
- Brand: KRYLON
- Manufacturer Part Number: K00859008
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
