About this product
📘 Overview
Komatsu windshield replacement — front Glass — the Komatsu replacement for OEM 423-926-4712. It covers 4 published Komatsu models, listed in full further down this page. The pane installs into the original cab frame using the factory glazing seal and retaining hardware, so no cab modification is required. Sold as a komatsu windshield replacement and listed as a komatsu windshield replacement, it is matched to the OEM number rather than offered as a universal fit.
⚙ Key Features of the Komatsu D423 Front Glass
- Direct interchange with OEM 423-926-4712 — same mounting points and same fit as the original Komatsu part
- One part number across 4 models spanning Komatsu machines — one spare covers a mixed fleet
- Packed for crate — the shipping method Depco specifies for this part
- A true skid steer front glass — the komatsu front glass is dimensioned from the original Komatsu part, not adapted from a similar one
🔑 Why Fit the OEM 423-926-4712 Front Glass Replacement
- Restores the original sightline — cracked cab glass is a visibility and pre-start inspection failure, not a cosmetic problem
- Aftermarket pricing against a dealer pane with the identical cut and the identical mounting method
- Ordering a komatsu skid steer by OEM number removes the guesswork — the front glass replacement fitment on this page is published, not inferred
📊 Komatsu windshield replacement Specifications — OEM 423-926-4712
Specification Value OEM part number 423-926-4712 Depco part number D423-926-4712 Part type Front Glass Glass Length 34" Box Glass Width 16" Glass Height 48" Machine class Skid Steer Models covered 4 Installation Original cab frame, factory glazing seal Shipping method CRATE🚜 Which Komatsu Models Take the OEM 423-926-4712 Front Glass?
This is a machine-specific replacement part matched to OEM 423-926-4712, not a universal fit. Fitment follows the published model list below:
Machine group Models Komatsu machines D423, 926, 4712, 4711Find your model in the table above and verify the serial-number range before ordering. If your model is not listed, email support@eskidsteer.com or message us on chat with the machine model and serial number. Everything needed to confirm fitment is on this page — add it to your cart to check delivered pricing for your address.
🔗 Parts Often Bought With the 423-926-4712 Front Glass
These are stocked on eskidsteer.com and relate directly to this front glass — the opposite side, a part supplied inside the same kit, or another part fitting the same machines:
Part OEM number Why it is listed here Komatsu Wheel Loader Front Cab Glass for WA475-10E0 OEM 421-926-7711 the same part for other models Komatsu Loader Front Center Glass for WA270-8, WA320-7, WA320-8 OEM 419-926-5541 the same part for other modelsInspect on arrival, not afterwards: unwrap enough to see the pane while the driver waits, and record any damage on the receipt before signing. A clean Bill of Lading ends any claim against the carrier.
❓ OEM 423-926-4712 Front Glass Questions, Answered
Is this an exact replacement for Komatsu OEM 423-926-4712?
Yes. The Depco D423-926-4712 is a direct interchange for OEM 423-926-4712 and fits the original mounting position without modification.
Will the 423-926-4712 part fit a D423 and a 4711?
Yes. Both the D423 and the 4711 are on the published fitment list for OEM 423-926-4712, along with 2 other models shown in the compatibility table on this page.
Do I need new seals to fit the 423-926-4712 glass?
No. The front glass installs into the original cab frame using the factory seal and retaining hardware. Replace the glazing strip only if it is perished or torn.
How does the Komatsu Front Glass ship?
Freight carriage applies to this item. Add it to the cart and enter your address to see the charge, selecting lift gate service if there is no dock at the delivery point.
Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
