Komatsu Excavator Lower Glass for PC130-8, PC200LC-8, PC240LC-11 | Depco

📘 Overview

Excavator cab glass — lower Cab Glass — the Komatsu replacement for OEM 20Y-53-11611, cut to 32.5" X 18.5". It covers 30 published Komatsu models, listed in full further down this page. The pane installs into the original cab frame using the factory glazing seal and retaining hardware, so no cab modification is required. Sold as a excavator cab glass and listed as a excavator cab glass, it is matched to the OEM number rather than offered as a universal fit.

⚙ Key Features of the Komatsu PC130-8 Lower Cab Glass

• Cut to the OEM 20Y-53-11611 pattern at 32.5" X 18.5" — drops into the existing aperture with no trimming
• Direct interchange with OEM 20Y-53-11611 — same mounting points and same fit as the original Komatsu part
• One part number across 30 models spanning Komatsu excavators — one spare covers a mixed fleet
• Packed for medium flat pack — the shipping method Depco specifies for this part
• A true excavator lower cab glass — the komatsu lower cab glass is dimensioned from the original Komatsu part, not adapted from a similar one

🔑 Why Fit the OEM 20Y-53-11611 Lower Cab Glass Replacement

• Restores the original sightline — cracked cab glass is a visibility and pre-start inspection failure, not a cosmetic problem
• Aftermarket pricing against a dealer pane with the identical cut and the identical mounting method
• One number covers 30 machines — a yard running mixed Komatsu models stocks one spare rather than several
• Ordering a komatsu excavator by OEM number removes the guesswork — the lower cab glass replacement fitment on this page is published, not inferred

📊 Excavator cab glass Specifications — OEM 20Y-53-11611

Specification Value OEM part number 20Y-53-11611 Depco part number D20Y-53-11611 Part type Lower Cab Glass Dimensions 32.5" X 18.5" Machine class Excavator Models covered 30 Installation Original cab frame, factory glazing seal Shipping method Medium Flat Pack

🚜 Which Komatsu Models Take the OEM 20Y-53-11611 Lower Cab Glass?

This is a machine-specific replacement part matched to OEM 20Y-53-11611, not a universal fit. Fitment follows the published model list below:

Machine group Models Komatsu excavators PC130-8, 130LC-10, 160LC-10, 170LC-10, PC200-8, PC200LC-8, 210LC-10, 210LC-11, PC210-8K, PC210LC-8K, PC220-8, PC220LC-8, PC240LC-8K, 240LC-10, 240LC-11, PC270-8, PC290LC-8K, 290LC-10, 290LC-11, PC300LC-8, PC300-8, 340LC-10, PC350LC-8, 360LC-11, PC390LC, PC400-8, PC400LC-8, PC450LC-8, 490LC-11, D20Y-53

The table above lists every model this part covers; check yours, and the serial-number range, before ordering. If your model is not listed, email support@eskidsteer.com or message us on chat with the machine model and serial number. Everything needed to confirm fitment is on this page — add it to your cart to check delivered pricing for your address.

🔗 Parts Often Bought With the 20Y-53-11611 Lower Cab Glass

These are stocked on eskidsteer.com and relate directly to this lower cab glass — the opposite side, a part supplied inside the same kit, or another part fitting the same machines:

Part OEM number Why it is listed here Komatsu Upper Rear Door Glass for PC130-8, PC200-8, PC210LC-11 OEM 20Y-53-12840 fits the same machines Komatsu Upper Door Glass for PC130-8, PC200-8, PC210LC-11 OEM 20Y-53-12850 fits the same machines Komatsu Front Glass Assembly for PC130-8, PC160LC-10, PC210LC-10 OEM 20Y-53-11601 fits the same machines Komatsu Excavator Door Window for PC130LC-10, PC160LC-10, PC210LC-11, PC290LC-10 OEM 2A5-53-11171 the same part for other models

❓ OEM 20Y-53-11611 Lower Cab Glass Questions, Answered