About this product
📘 Overview
Excavator cab glass — cab Glass — the Komatsu replacement for OEM 20Y-54-35132. It covers 29 published Komatsu models, listed in full further down this page. The pane installs into the original cab frame using the factory glazing seal and retaining hardware, so no cab modification is required. Sold as a excavator cab glass and listed as a excavator cab glass, it is matched to the OEM number rather than offered as a universal fit.
⚙ Key Features of the Komatsu PC100-6 Cab Glass
- Direct interchange with OEM 20Y-54-35132 — same mounting points and same fit as the original Komatsu part
- One part number across 29 models spanning Komatsu excavators — one spare covers a mixed fleet
- Packed for ups — the shipping method Depco specifies for this part
- A true cab glass replacement — the komatsu cab glass is dimensioned from the original Komatsu part, not adapted from a similar one
🔑 Why Fit the OEM 20Y-54-35132 Cab Glass Replacement
- Restores the original sightline — cracked cab glass is a visibility and pre-start inspection failure, not a cosmetic problem
- Aftermarket pricing against a dealer pane with the identical cut and the identical mounting method
- One number covers 29 machines — a yard running mixed Komatsu models stocks one spare rather than several
- Ordering a replacement cab glass by OEM number removes the guesswork — the komatsu excavator fitment on this page is published, not inferred
📊 Excavator cab glass Specifications — OEM 20Y-54-35132
Specification Value OEM part number 20Y-54-35132 Depco part number D20Y-54-35132 Part type Cab Glass Glass Length 34" Box Glass Width 4" Glass Height 43" Machine class Excavator Models covered 29 Installation Original cab frame, factory glazing seal Shipping method UPS🚜 Which Komatsu Models Take the OEM 20Y-54-35132 Cab Glass?
This is a machine-specific replacement part matched to OEM 20Y-54-35132, not a universal fit. Fitment follows the published model list below:
Machine group Models Komatsu excavators PC100-6, PC100-6Z, PC100L-6, PC120-6, PC120-6Z, PC120LC-6, PC120LC, PC130-6, PC200-6, PC150-6K, PC160-6K, PC180LC-6K, PC210-6, PC220-6, PC230-6, PC240-6K, PC250-6, PC300-6, PC340-6K, PC350-6, PC380LC-6K, PC400-6, PC450-6, PC600-6, PC750-6, PC800-6, PW130-6K, PW150ES-6K, PW170ESCheck your model against the table above, and confirm your serial-number range before you order. If your model is not listed, email support@eskidsteer.com or message us on chat with the machine model and serial number. Everything needed to confirm fitment is on this page — add it to your cart to check delivered pricing for your address.
🔗 Parts Often Bought With the 20Y-54-35132 Cab Glass
These are stocked on eskidsteer.com and relate directly to this cab glass — the opposite side, a part supplied inside the same kit, or another part fitting the same machines:
Part OEM number Why it is listed here Komatsu Upper Rear Door Glass for Dash 6 Series, PC100-6, PC120-6, PC200-6 OEM 20Y-54-35831 fits the same machines Komatsu Excavator Front Upper Windshield Glass for PC100-6, PC200-6, PC300-6 OEM 20Y-54-38122 fits the same machines Komatsu Excavator Front Lower Glass for Dash 6 Series OEM 20Y-54-36113 fits the same machines Komatsu Excavator Boom Side Cab Window Glass OEM 22B-54-15221 the same part for other modelsCheck the glass before the driver leaves: any breakage must be written on the delivery receipt at the moment of delivery. A Bill of Lading signed clean closes the carrier claim window for good.
❓ OEM 20Y-54-35132 Cab Glass Questions, Answered
Is this an exact replacement for Komatsu OEM 20Y-54-35132?
Yes. The Depco D20Y-54-35132 is a direct interchange for OEM 20Y-54-35132 and fits the original mounting position without modification.
Will the 20Y-54-35132 part fit a PC100-6 and a PW170ES?
Yes. Both the PC100-6 and the PW170ES are on the published fitment list for OEM 20Y-54-35132, along with 27 other models shown in the compatibility table on this page.
Do I need new seals to fit the 20Y-54-35132 glass?
No. Installation reuses the factory seal and retaining hardware already in the cab frame, so only a perished glazing strip needs replacing.
How does the Komatsu Cab Glass ship?
Komatsu Excavator Cab Glass travels on a pallet by LTL freight. Your shipping cost is worked out at checkout from the delivery address, with lift gate available as an option.
Description supplied by eSkidSteer through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
