About this product
Clear Snow Off Your Teryx
Winter doesn't have to mean your Kawasaki Teryx sits idle. This 72" snow plow blade mounts to your machine and lets you handle serious snow without breaking a sweat. Angle it five different ways—straight ahead or off to either side—so you can push snow where you need it. Quick-connect pins mean you attach or remove the blade in minutes, no fussing around. Built to stand up to the toughest weather, this kit gets your Teryx working the day snow hits.
Built Heavy Duty
This isn't a flimsy blade. The main cutting surface is 10-gauge steel, while the leading edge where all the impact happens is beefed up to 4-gauge steel alloy. Reinforcing ribs running across the back add serious stiffness. Shock-absorbing springs absorb the constant jolt from hard-packed snow and rough ground. The whole thing gets a powder coat finish so rust won't eat away at it season after season.
Angle Control That Actually Works
You get seven different plowing angles—0°, 10°, 20°, and 30° pointing left or right of center. This winch-operated system responds fast, so you're not stuck with one position when conditions change. The blade's attack angle also adjusts between 52° and 65°, and the skid shoes move up and down to stay flat on uneven ground. If your machine's lifted up to 3 inches, you can dial things in so the blade sits right.
Quick Setup and Takedown
The mount bolts straight to your Teryx and stays compact enough to leave mounted year-round. When a storm rolls in and you're ready to plow, just plug in the blade using the quick-connect system and go. No long afternoon in the garage prepping gear.
Optional Deluxe Add-Ons
Want more control and cleaner plowing? SuperATV's deluxe accessory kit throws in four extras. Pair of 3/16" steel side shields keeps your cutting line sharp. Twenty-three plow markers clip on so other people can see your blade edges in low light. A 1/8" LDPE deflector stops snow from piling up and spilling over the top of the blade. The plow angle actuator kit includes a dash-mounted switch and an 1,800 lb. actuator so you adjust angles from inside the cab—no hopping out in the cold.
What You're Getting
Fitment Notes
Fits Kawasaki Teryx 750 (2011–2013), Teryx 4 750 (2011–2013), Teryx 800 (2014+), and Teryx 4 800 (2014+). If your machine has more than 3" of lift, you'll also need the Plow Pro Snow Plow drop bracket (SPB-DB-001), sold separately. A winch is required to operate the plow.
Winter doesn't have to mean your Kawasaki Teryx sits idle. This 72" snow plow blade mounts to your machine and lets you handle serious snow without breaking a sweat. Angle it five different ways—straight ahead or off to either side—so you can push snow where you need it. Quick-connect pins mean you attach or remove the blade in minutes, no fussing around. Built to stand up to the toughest weather, this kit gets your Teryx working the day snow hits.
Built Heavy Duty
This isn't a flimsy blade. The main cutting surface is 10-gauge steel, while the leading edge where all the impact happens is beefed up to 4-gauge steel alloy. Reinforcing ribs running across the back add serious stiffness. Shock-absorbing springs absorb the constant jolt from hard-packed snow and rough ground. The whole thing gets a powder coat finish so rust won't eat away at it season after season.
- 10-gauge steel construction on blade body
- 4-gauge steel alloy cutting edge
- Support ribs (two 4-gauge vertical, one 10-gauge horizontal) reinforce high-wear zones
- Tilt-forward design soaks up repeated impacts
- Powder coat protects against rust and corrosion
Angle Control That Actually Works
You get seven different plowing angles—0°, 10°, 20°, and 30° pointing left or right of center. This winch-operated system responds fast, so you're not stuck with one position when conditions change. The blade's attack angle also adjusts between 52° and 65°, and the skid shoes move up and down to stay flat on uneven ground. If your machine's lifted up to 3 inches, you can dial things in so the blade sits right.
Quick Setup and Takedown
The mount bolts straight to your Teryx and stays compact enough to leave mounted year-round. When a storm rolls in and you're ready to plow, just plug in the blade using the quick-connect system and go. No long afternoon in the garage prepping gear.
Optional Deluxe Add-Ons
Want more control and cleaner plowing? SuperATV's deluxe accessory kit throws in four extras. Pair of 3/16" steel side shields keeps your cutting line sharp. Twenty-three plow markers clip on so other people can see your blade edges in low light. A 1/8" LDPE deflector stops snow from piling up and spilling over the top of the blade. The plow angle actuator kit includes a dash-mounted switch and an 1,800 lb. actuator so you adjust angles from inside the cab—no hopping out in the cold.
What You're Getting
- 72" snow plow blade
- Quick-connect plow mount
- Snow plow frame assembly
- Deluxe kit (if ordered): two side shields, deflector, marker kit, angle actuator kit
Fitment Notes
Fits Kawasaki Teryx 750 (2011–2013), Teryx 4 750 (2011–2013), Teryx 800 (2014+), and Teryx 4 800 (2014+). If your machine has more than 3" of lift, you'll also need the Plow Pro Snow Plow drop bracket (SPB-DB-001), sold separately. A winch is required to operate the plow.
TraderHank offers free shipping to the lower 48 states, same or next day shipping on in-stock orders, and a price match guarantee.
Not sure if this fits your machine?
📱 Text Us at 877-425-4265
We'll confirm fitment before you order — we typically respond within minutes.
Description supplied by TraderHank through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.
