About this product
Product Description
The K-FLEX 800-373-PTB is a blue-colored, solvent-based contact adhesive formulated for bonding flexible elastomeric pipe insulation and sheet insulation. Built on a synthetic rubber base with aliphatic, aromatic, and ketone solvents, it delivers a strong, durable bond in HVAC and mechanical insulation applications. The pint-size container holds 16 oz and features a brush-top applicator for direct, controlled application without additional tools. Key performance ratings include a temperature limit of 220 degrees F for pipe insulation and 200 degrees F for full bonding sheets, with an open time not to exceed 10 minutes. HVAC insulation installers and mechanical contractors are the primary users of this product.
This adhesive is used to bond closed-cell elastomeric foam insulation to pipes, fittings, and equipment in residential and commercial HVAC and mechanical systems. The brush-top format makes it well-suited for field work where precise application to seams, butt joints, and irregular surfaces is required. Coverage runs 200 to 300 square feet per gallon on a single surface, making the pint size appropriate for smaller jobs or spot repairs. Minimum dry time is 5 to 10 minutes under normal conditions, with shorter dry times when spray application methods are used.
Key Features
- Synthetic rubber base with solvent blend for strong contact bonding on elastomeric foam insulation
- Brush-top applicator built into the pint container for controlled, tool-free application
- Temperature limit of 220 degrees F for pipe insulation and 200 degrees F for full bonding sheets
- Open time not to exceed 10 minutes allows proper positioning before bond sets
- Coverage of 200 to 300 sq. ft. per gallon on a single surface
- Meets Mil A 24179A Type 2 Class 1 Amendment 2 flammability standard (QPL RUBQA-373)
Compatibility
Designed for use with flexible elastomeric foam pipe insulation and sheet insulation products in HVAC and mechanical insulation applications.
Installation Notes
This adhesive is typically applied by licensed insulation installers or HVAC mechanics working on pipe and equipment insulation. The flash point is below -4 degrees F, making this a highly flammable material - keep away from open flames, sparks, and heat sources during application and storage. Work in a well-ventilated area and follow all applicable safety data sheet guidance for solvent-based adhesives. Do not exceed the 10-minute open time between application and bonding, and allow full dry time before returning the system to service.
Technical Specifications
- Type: Contact Adhesive
- Base: Synthetic Rubber
- Color: Blue
- Volume: 16 oz (1 pint)
- Coverage: 200-300 sq. ft. per gallon (one surface)
- Temperature Limit: 220 degrees F (pipe insulation) / 200 degrees F (full bonding sheets)
- Flash Point: Less than -4 degrees F
- Open Time: Not to exceed 10 minutes
- Minimum Dry Time: 5-10 minutes under normal conditions
- Solid Content: 20% by weight
- Viscosity: Thin syrup
- Solvents: Aliphatic, aromatic, and ketone
- Flammability Standard: Meets Mil A 24179A Type 2 Class 1 Amendment 2 (QPL RUBQA-373)
- Weight: 25.61 pounds
Standard Information
- Brand: K-FLEX
- Manufacturer Part Number: 800-373-PTB
Description supplied by Voomi Supply through its current Shopify listing. Product, performance, and health claims are the seller’s and have not been independently verified by StorkScout.






