John Deere Small Frame G Series Forestry Windshield | Shields Lexan Polycarbonate

✓ Guaranteed exact fit

Formed to OEM shape, milled to OEM thickness. No drilling, shimming or trimming.

✓ 10-year warranty

Against breakage, coating failure, excessive haze and yellowing.

✓ Damaged in transit? Replaced free

Report it within 7 days and the replacement is on us.

John Deere Small Frame G Series Forestry Windshield Glass Replacement

If you're on this page, something already came through your windshield. The question isn't whether to replace it — it's whether to put the same glass back in and wait for it to happen again.

If you've been calling this your forestry door, this is the part you mean — the clear front panel that takes the strike, not the frame around it. Buyers use both names for it; the panel is the same.

Factory glass is designed to break safely, not to survive what forestry and clearing work throws at a cab. This is the alternative. Same shape as your John Deere glass, same opening, same hardware, roughly 260 times the impact strength — and for most owners it's the last one they buy for that machine.

Will This John Deere Skid Steer Windshield Fit Your Machine?

1. Start with the glass number — this is the check that settles it. Look at the corner of your original panel for #T361540. If it matches, you're on the right page whatever the decal says.

2. Note the fitment detail below before you order.

Compatible John Deere Models

Every machine below takes this panel. Find yours, then confirm against the glass number.

John Deere Windshield Thickness Guide — Which Should You Buy?

This is the real decision on this page, and it's about what the machine does — not how careful the operator is.

1/4"
General duty Matches your OEM glass exactly. Fine for yard work, snow, dust and loading. It won't shatter the way glass does, but it isn't an impact panel. 3/8"
Mid-weight A real step up in impact resistance. Brush cutting, grapple work and land clearing. 1/2"
WE RECOMMEND Our recommendation. Mulching heads, tree shears and high-velocity debris — this is the grade that survives the kind of strike that broke the last one.

Not sure between two? Take the thicker. The price difference is small next to a day with the machine parked, and going up a grade costs nothing in fitment — a 1/2" panel seats in the opening exactly like a 1/4" one.

"Won't a thicker panel scratch?" It's the fair objection, and it's why we post-apply SUPERCOAT™ to both faces after forming rather than co-extruding it. Take steel wool to the surface and it wipes clean.

SHIELDS® Lexan Polycarbonate vs John Deere Factory Glass

SHIELDS® SUPERCOATED™ John Deere factory glass Impact strength Around 260× stronger Baseline Weight About half Baseline How it fails Flexes, takes the hit, stays in the opening Shatters, all at once, into the cab Wipers Yes — SUPERCOAT™ both faces Yes Fitment Drops into the factory opening Drops into the factory opening Warranty 10 years against manufacturing defects Varies by dealer

Installing Your John Deere Windshield

The panel drops into the factory opening and reuses your existing frame, gasket and mounting hardware. No drilling, no shimming, no trimming.

One thing worth doing while the old panel is out: look at the gasket. If it has hardened, cracked or taken a permanent set around the old glass, replace it before the new panel goes in. A tired gasket is the most common cause of a leak on an otherwise perfect install, and your dealer stocks them.

Install & care sheet: Download the SHIELDS® Installation, Care & Maintenance sheet (PDF) — worth reading before you start.

Install video: ##VIDEO_EMBED##

John Deere Windshield Warranty, Returns and Delivery

Ten-year warranty against manufacturing defects — breakage, coating failure, excessive haze and excessive yellowing. Scratching from use isn't covered, and nobody should tell you otherwise.

Returns. If the panel arrives defective, or we send the wrong part, we put it right at our cost. If you simply change your mind, the panel can be returned subject to a 25% restocking fee. That's the whole policy — no small print.

John Deere Small Frame G Series Forestry Windshield — Questions

Which number should I be checking on my glass?

The number stamped in the corner of your original panel. This listing replaces #T361540. Manufacturers reuse cab designs across model years and series, so the number is more reliable than the badge on the machine.

Can I fit this myself, or does it need a shop?

It's a mechanical install — the panel drops into the factory opening and your existing frame, gasket and hardware go back on. No drilling or trimming. A second pair of hands makes seating it easier.

Do I need to replace the gasket?

Not always, but inspect it while the old panel is out. If it's hardened, cracked or has taken a permanent set, replace it before fitting — a tired gasket is the usual cause of a leak after an otherwise correct install. Your dealer stocks them.

Will a 1/2" panel still fit my cab?

Yes. We mill the perimeter back to OEM glass thickness, so the thicker panel seats in the opening exactly as the original did.

How do I know this is the right panel for my machine?

Match the shape and the opening first, then confirm against the part your dealer lists for that position. If anything looks different from the panel you are replacing, check before fitting rather than after — a modified panel is not a warranty claim.

Does it come with hardware?

No, and it does not need to. The panel is formed and milled to seat in your existing frame, so the hardware from your original glass transfers straight across.

How do I clean a Lexan polycarbonate windshield?

Mild soap and water with a soft cloth, then dry it off. Avoid abrasive cleaners, squeegees and power washers — those mar the coating, and coating damage from the wrong cleaner isn't a warranty claim. The care sheet lists approved products.

Will it fog or go yellow?

Yellowing is slow and UV-driven, which is why the warranty names excessive yellowing specifically. For fogging, treat it as you would glass — keep the cab vented and the panel clean.